freeswitch/libs/libvpx/vp9/encoder/vp9_ratectrl.c

/*
 *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include <assert.h>
#include <limits.h>
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "vpx_dsp/vpx_dsp_common.h"
#include "vpx_mem/vpx_mem.h"
#include "vpx_ports/mem.h"
#include "vpx_ports/system_state.h"

#include "vp9/common/vp9_alloccommon.h"
#include "vp9/encoder/vp9_aq_cyclicrefresh.h"
#include "vp9/common/vp9_common.h"
#include "vp9/common/vp9_entropymode.h"
#include "vp9/common/vp9_quant_common.h"
#include "vp9/common/vp9_seg_common.h"

#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/encoder/vp9_ratectrl.h"

// Max rate target for 1080P and below encodes under normal circumstances
// (1920 * 1080 / (16 * 16)) * MAX_MB_RATE bits per MB
#define MAX_MB_RATE 250
#define MAXRATE_1080P 2025000

#define DEFAULT_KF_BOOST 2000
#define DEFAULT_GF_BOOST 2000

#define LIMIT_QRANGE_FOR_ALTREF_AND_KEY 1

#define MIN_BPB_FACTOR 0.005
#define MAX_BPB_FACTOR 50

#define FRAME_OVERHEAD_BITS 200

#if CONFIG_VP9_HIGHBITDEPTH
#define ASSIGN_MINQ_TABLE(bit_depth, name)                   \
  do {                                                       \
    switch (bit_depth) {                                     \
      case VPX_BITS_8: name = name##_8; break;               \
      case VPX_BITS_10: name = name##_10; break;             \
      case VPX_BITS_12: name = name##_12; break;             \
      default:                                               \
        assert(0 &&                                          \
               "bit_depth should be VPX_BITS_8, VPX_BITS_10" \
               " or VPX_BITS_12");                           \
        name = NULL;                                         \
    }                                                        \
  } while (0)
#else
#define ASSIGN_MINQ_TABLE(bit_depth, name) \
  do {                                     \
    (void)bit_depth;                       \
    name = name##_8;                       \
  } while (0)
#endif

// Tables relating active max Q to active min Q
static int kf_low_motion_minq_8[QINDEX_RANGE];
static int kf_high_motion_minq_8[QINDEX_RANGE];
static int arfgf_low_motion_minq_8[QINDEX_RANGE];
static int arfgf_high_motion_minq_8[QINDEX_RANGE];
static int inter_minq_8[QINDEX_RANGE];
static int rtc_minq_8[QINDEX_RANGE];

#if CONFIG_VP9_HIGHBITDEPTH
static int kf_low_motion_minq_10[QINDEX_RANGE];
static int kf_high_motion_minq_10[QINDEX_RANGE];
static int arfgf_low_motion_minq_10[QINDEX_RANGE];
static int arfgf_high_motion_minq_10[QINDEX_RANGE];
static int inter_minq_10[QINDEX_RANGE];
static int rtc_minq_10[QINDEX_RANGE];
static int kf_low_motion_minq_12[QINDEX_RANGE];
static int kf_high_motion_minq_12[QINDEX_RANGE];
static int arfgf_low_motion_minq_12[QINDEX_RANGE];
static int arfgf_high_motion_minq_12[QINDEX_RANGE];
static int inter_minq_12[QINDEX_RANGE];
static int rtc_minq_12[QINDEX_RANGE];
#endif

static int gf_high = 2000;
static int gf_low = 400;
static int kf_high = 5000;
static int kf_low = 400;

// Functions to compute the active minq lookup table entries based on a
// formulaic approach to facilitate easier adjustment of the Q tables.
// The formulae were derived from computing a 3rd order polynomial best
// fit to the original data (after plotting real maxq vs minq (not q index))
static int get_minq_index(double maxq, double x3, double x2, double x1,
                          vpx_bit_depth_t bit_depth) {
  int i;
  const double minqtarget = VPXMIN(((x3 * maxq + x2) * maxq + x1) * maxq, maxq);

  // Special case handling to deal with the step from q2.0
  // down to lossless mode represented by q 1.0.
  if (minqtarget <= 2.0) return 0;

  for (i = 0; i < QINDEX_RANGE; i++) {
    if (minqtarget <= vp9_convert_qindex_to_q(i, bit_depth)) return i;
  }

  return QINDEX_RANGE - 1;
}

static void init_minq_luts(int *kf_low_m, int *kf_high_m, int *arfgf_low,
                           int *arfgf_high, int *inter, int *rtc,
                           vpx_bit_depth_t bit_depth) {
  int i;
  for (i = 0; i < QINDEX_RANGE; i++) {
    const double maxq = vp9_convert_qindex_to_q(i, bit_depth);
    kf_low_m[i] = get_minq_index(maxq, 0.000001, -0.0004, 0.150, bit_depth);
    kf_high_m[i] = get_minq_index(maxq, 0.0000021, -0.00125, 0.55, bit_depth);
    arfgf_low[i] = get_minq_index(maxq, 0.0000015, -0.0009, 0.30, bit_depth);
    arfgf_high[i] = get_minq_index(maxq, 0.0000021, -0.00125, 0.55, bit_depth);
    inter[i] = get_minq_index(maxq, 0.00000271, -0.00113, 0.70, bit_depth);
    rtc[i] = get_minq_index(maxq, 0.00000271, -0.00113, 0.70, bit_depth);
  }
}

void vp9_rc_init_minq_luts(void) {
  init_minq_luts(kf_low_motion_minq_8, kf_high_motion_minq_8,
                 arfgf_low_motion_minq_8, arfgf_high_motion_minq_8,
                 inter_minq_8, rtc_minq_8, VPX_BITS_8);
#if CONFIG_VP9_HIGHBITDEPTH
  init_minq_luts(kf_low_motion_minq_10, kf_high_motion_minq_10,
                 arfgf_low_motion_minq_10, arfgf_high_motion_minq_10,
                 inter_minq_10, rtc_minq_10, VPX_BITS_10);
  init_minq_luts(kf_low_motion_minq_12, kf_high_motion_minq_12,
                 arfgf_low_motion_minq_12, arfgf_high_motion_minq_12,
                 inter_minq_12, rtc_minq_12, VPX_BITS_12);
#endif
}

// These functions use formulaic calculations to make playing with the
// quantizer tables easier. If necessary they can be replaced by lookup
// tables if and when things settle down in the experimental bitstream
double vp9_convert_qindex_to_q(int qindex, vpx_bit_depth_t bit_depth) {
// Convert the index to a real Q value (scaled down to match old Q values)
#if CONFIG_VP9_HIGHBITDEPTH
  switch (bit_depth) {
    case VPX_BITS_8: return vp9_ac_quant(qindex, 0, bit_depth) / 4.0;
    case VPX_BITS_10: return vp9_ac_quant(qindex, 0, bit_depth) / 16.0;
    case VPX_BITS_12: return vp9_ac_quant(qindex, 0, bit_depth) / 64.0;
    default:
      assert(0 && "bit_depth should be VPX_BITS_8, VPX_BITS_10 or VPX_BITS_12");
      return -1.0;
  }
#else
  return vp9_ac_quant(qindex, 0, bit_depth) / 4.0;
#endif
}

int vp9_rc_bits_per_mb(FRAME_TYPE frame_type, int qindex,
                       double correction_factor, vpx_bit_depth_t bit_depth) {
  const double q = vp9_convert_qindex_to_q(qindex, bit_depth);
  int enumerator = frame_type == KEY_FRAME ? 2700000 : 1800000;

  assert(correction_factor <= MAX_BPB_FACTOR &&
         correction_factor >= MIN_BPB_FACTOR);

  // q based adjustment to baseline enumerator
  enumerator += (int)(enumerator * q) >> 12;
  return (int)(enumerator * correction_factor / q);
}

int vp9_estimate_bits_at_q(FRAME_TYPE frame_type, int q, int mbs,
                           double correction_factor,
                           vpx_bit_depth_t bit_depth) {
  const int bpm =
      (int)(vp9_rc_bits_per_mb(frame_type, q, correction_factor, bit_depth));
  return VPXMAX(FRAME_OVERHEAD_BITS,
                (int)((uint64_t)bpm * mbs) >> BPER_MB_NORMBITS);
}

int vp9_rc_clamp_pframe_target_size(const VP9_COMP *const cpi, int target) {
  const RATE_CONTROL *rc = &cpi->rc;
  const VP9EncoderConfig *oxcf = &cpi->oxcf;
  const int min_frame_target =
      VPXMAX(rc->min_frame_bandwidth, rc->avg_frame_bandwidth >> 5);
  if (target < min_frame_target) target = min_frame_target;
  if (cpi->refresh_golden_frame && rc->is_src_frame_alt_ref) {
    // If there is an active ARF at this location use the minimum
    // bits on this frame even if it is a constructed arf.
    // The active maximum quantizer insures that an appropriate
    // number of bits will be spent if needed for constructed ARFs.
    target = min_frame_target;
  }
  // Clip the frame target to the maximum allowed value.
  if (target > rc->max_frame_bandwidth) target = rc->max_frame_bandwidth;
  if (oxcf->rc_max_inter_bitrate_pct) {
    const int max_rate =
        rc->avg_frame_bandwidth * oxcf->rc_max_inter_bitrate_pct / 100;
    target = VPXMIN(target, max_rate);
  }
  return target;
}

int vp9_rc_clamp_iframe_target_size(const VP9_COMP *const cpi, int target) {
  const RATE_CONTROL *rc = &cpi->rc;
  const VP9EncoderConfig *oxcf = &cpi->oxcf;
  if (oxcf->rc_max_intra_bitrate_pct) {
    const int max_rate =
        rc->avg_frame_bandwidth * oxcf->rc_max_intra_bitrate_pct / 100;
    target = VPXMIN(target, max_rate);
  }
  if (target > rc->max_frame_bandwidth) target = rc->max_frame_bandwidth;
  return target;
}

// Update the buffer level for higher temporal layers, given the encoded current
// temporal layer.
static void update_layer_buffer_level(SVC *svc, int encoded_frame_size) {
  int i = 0;
  int current_temporal_layer = svc->temporal_layer_id;
  for (i = current_temporal_layer + 1; i < svc->number_temporal_layers; ++i) {
    const int layer =
        LAYER_IDS_TO_IDX(svc->spatial_layer_id, i, svc->number_temporal_layers);
    LAYER_CONTEXT *lc = &svc->layer_context[layer];
    RATE_CONTROL *lrc = &lc->rc;
    int bits_off_for_this_layer =
        (int)(lc->target_bandwidth / lc->framerate - encoded_frame_size);
    lrc->bits_off_target += bits_off_for_this_layer;

    // Clip buffer level to maximum buffer size for the layer.
    lrc->bits_off_target =
        VPXMIN(lrc->bits_off_target, lrc->maximum_buffer_size);
    lrc->buffer_level = lrc->bits_off_target;
  }
}

// Update the buffer level: leaky bucket model.
static void update_buffer_level(VP9_COMP *cpi, int encoded_frame_size) {
  const VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;

  // Non-viewable frames are a special case and are treated as pure overhead.
  if (!cm->show_frame) {
    rc->bits_off_target -= encoded_frame_size;
  } else {
    rc->bits_off_target += rc->avg_frame_bandwidth - encoded_frame_size;
  }

  // Clip the buffer level to the maximum specified buffer size.
  rc->bits_off_target = VPXMIN(rc->bits_off_target, rc->maximum_buffer_size);

  // For screen-content mode, and if frame-dropper is off, don't let buffer
  // level go below threshold, given here as -rc->maximum_ buffer_size.
  if (cpi->oxcf.content == VP9E_CONTENT_SCREEN &&
      cpi->oxcf.drop_frames_water_mark == 0)
    rc->bits_off_target = VPXMAX(rc->bits_off_target, -rc->maximum_buffer_size);

  rc->buffer_level = rc->bits_off_target;

  if (is_one_pass_cbr_svc(cpi)) {
    update_layer_buffer_level(&cpi->svc, encoded_frame_size);
  }
}

int vp9_rc_get_default_min_gf_interval(int width, int height,
                                       double framerate) {
  // Assume we do not need any constraint lower than 4K 20 fps
  static const double factor_safe = 3840 * 2160 * 20.0;
  const double factor = width * height * framerate;
  const int default_interval =
      clamp((int)(framerate * 0.125), MIN_GF_INTERVAL, MAX_GF_INTERVAL);

  if (factor <= factor_safe)
    return default_interval;
  else
    return VPXMAX(default_interval,
                  (int)(MIN_GF_INTERVAL * factor / factor_safe + 0.5));
  // Note this logic makes:
  // 4K24: 5
  // 4K30: 6
  // 4K60: 12
}

int vp9_rc_get_default_max_gf_interval(double framerate, int min_gf_interval) {
  int interval = VPXMIN(MAX_GF_INTERVAL, (int)(framerate * 0.75));
  interval += (interval & 0x01);  // Round to even value
  return VPXMAX(interval, min_gf_interval);
}

void vp9_rc_init(const VP9EncoderConfig *oxcf, int pass, RATE_CONTROL *rc) {
  int i;

  if (pass == 0 && oxcf->rc_mode == VPX_CBR) {
    rc->avg_frame_qindex[KEY_FRAME] = oxcf->worst_allowed_q;
    rc->avg_frame_qindex[INTER_FRAME] = oxcf->worst_allowed_q;
  } else {
    rc->avg_frame_qindex[KEY_FRAME] =
        (oxcf->worst_allowed_q + oxcf->best_allowed_q) / 2;
    rc->avg_frame_qindex[INTER_FRAME] =
        (oxcf->worst_allowed_q + oxcf->best_allowed_q) / 2;
  }

  rc->last_q[KEY_FRAME] = oxcf->best_allowed_q;
  rc->last_q[INTER_FRAME] = oxcf->worst_allowed_q;

  rc->buffer_level = rc->starting_buffer_level;
  rc->bits_off_target = rc->starting_buffer_level;

  rc->rolling_target_bits = rc->avg_frame_bandwidth;
  rc->rolling_actual_bits = rc->avg_frame_bandwidth;
  rc->long_rolling_target_bits = rc->avg_frame_bandwidth;
  rc->long_rolling_actual_bits = rc->avg_frame_bandwidth;

  rc->total_actual_bits = 0;
  rc->total_target_bits = 0;
  rc->total_target_vs_actual = 0;
  rc->avg_frame_low_motion = 0;
  rc->count_last_scene_change = 0;
  rc->af_ratio_onepass_vbr = 10;
  rc->prev_avg_source_sad_lag = 0;
  rc->high_source_sad = 0;
  rc->high_source_sad_lagindex = -1;
  rc->fac_active_worst_inter = 150;
  rc->fac_active_worst_gf = 100;
  rc->force_qpmin = 0;
  for (i = 0; i < MAX_LAG_BUFFERS; ++i) rc->avg_source_sad[i] = 0;
  rc->frames_since_key = 8;  // Sensible default for first frame.
  rc->this_key_frame_forced = 0;
  rc->next_key_frame_forced = 0;
  rc->source_alt_ref_pending = 0;
  rc->source_alt_ref_active = 0;

  rc->frames_till_gf_update_due = 0;
  rc->ni_av_qi = oxcf->worst_allowed_q;
  rc->ni_tot_qi = 0;
  rc->ni_frames = 0;

  rc->tot_q = 0.0;
  rc->avg_q = vp9_convert_qindex_to_q(oxcf->worst_allowed_q, oxcf->bit_depth);

  for (i = 0; i < RATE_FACTOR_LEVELS; ++i) {
    rc->rate_correction_factors[i] = 1.0;
  }

  rc->min_gf_interval = oxcf->min_gf_interval;
  rc->max_gf_interval = oxcf->max_gf_interval;
  if (rc->min_gf_interval == 0)
    rc->min_gf_interval = vp9_rc_get_default_min_gf_interval(
        oxcf->width, oxcf->height, oxcf->init_framerate);
  if (rc->max_gf_interval == 0)
    rc->max_gf_interval = vp9_rc_get_default_max_gf_interval(
        oxcf->init_framerate, rc->min_gf_interval);
  rc->baseline_gf_interval = (rc->min_gf_interval + rc->max_gf_interval) / 2;
}

int vp9_rc_drop_frame(VP9_COMP *cpi) {
  const VP9EncoderConfig *oxcf = &cpi->oxcf;
  RATE_CONTROL *const rc = &cpi->rc;
  if (!oxcf->drop_frames_water_mark ||
      (is_one_pass_cbr_svc(cpi) &&
       cpi->svc.spatial_layer_id > cpi->svc.first_spatial_layer_to_encode)) {
    return 0;
  } else {
    if (rc->buffer_level < 0) {
      // Always drop if buffer is below 0.
      return 1;
    } else {
      // If buffer is below drop_mark, for now just drop every other frame
      // (starting with the next frame) until it increases back over drop_mark.
      int drop_mark =
          (int)(oxcf->drop_frames_water_mark * rc->optimal_buffer_level / 100);
      if ((rc->buffer_level > drop_mark) && (rc->decimation_factor > 0)) {
        --rc->decimation_factor;
      } else if (rc->buffer_level <= drop_mark && rc->decimation_factor == 0) {
        rc->decimation_factor = 1;
      }
      if (rc->decimation_factor > 0) {
        if (rc->decimation_count > 0) {
          --rc->decimation_count;
          return 1;
        } else {
          rc->decimation_count = rc->decimation_factor;
          return 0;
        }
      } else {
        rc->decimation_count = 0;
        return 0;
      }
    }
  }
}

static double get_rate_correction_factor(const VP9_COMP *cpi) {
  const RATE_CONTROL *const rc = &cpi->rc;
  double rcf;

  if (cpi->common.frame_type == KEY_FRAME) {
    rcf = rc->rate_correction_factors[KF_STD];
  } else if (cpi->oxcf.pass == 2) {
    RATE_FACTOR_LEVEL rf_lvl =
        cpi->twopass.gf_group.rf_level[cpi->twopass.gf_group.index];
    rcf = rc->rate_correction_factors[rf_lvl];
  } else {
    if ((cpi->refresh_alt_ref_frame || cpi->refresh_golden_frame) &&
        !rc->is_src_frame_alt_ref && !cpi->use_svc &&
        (cpi->oxcf.rc_mode != VPX_CBR || cpi->oxcf.gf_cbr_boost_pct > 20))
      rcf = rc->rate_correction_factors[GF_ARF_STD];
    else
      rcf = rc->rate_correction_factors[INTER_NORMAL];
  }
  rcf *= rcf_mult[rc->frame_size_selector];
  return fclamp(rcf, MIN_BPB_FACTOR, MAX_BPB_FACTOR);
}

static void set_rate_correction_factor(VP9_COMP *cpi, double factor) {
  RATE_CONTROL *const rc = &cpi->rc;

  // Normalize RCF to account for the size-dependent scaling factor.
  factor /= rcf_mult[cpi->rc.frame_size_selector];

  factor = fclamp(factor, MIN_BPB_FACTOR, MAX_BPB_FACTOR);

  if (cpi->common.frame_type == KEY_FRAME) {
    rc->rate_correction_factors[KF_STD] = factor;
  } else if (cpi->oxcf.pass == 2) {
    RATE_FACTOR_LEVEL rf_lvl =
        cpi->twopass.gf_group.rf_level[cpi->twopass.gf_group.index];
    rc->rate_correction_factors[rf_lvl] = factor;
  } else {
    if ((cpi->refresh_alt_ref_frame || cpi->refresh_golden_frame) &&
        !rc->is_src_frame_alt_ref && !cpi->use_svc &&
        (cpi->oxcf.rc_mode != VPX_CBR || cpi->oxcf.gf_cbr_boost_pct > 20))
      rc->rate_correction_factors[GF_ARF_STD] = factor;
    else
      rc->rate_correction_factors[INTER_NORMAL] = factor;
  }
}

void vp9_rc_update_rate_correction_factors(VP9_COMP *cpi) {
  const VP9_COMMON *const cm = &cpi->common;
  int correction_factor = 100;
  double rate_correction_factor = get_rate_correction_factor(cpi);
  double adjustment_limit;

  int projected_size_based_on_q = 0;

  // Do not update the rate factors for arf overlay frames.
  if (cpi->rc.is_src_frame_alt_ref) return;

  // Clear down mmx registers to allow floating point in what follows
  vpx_clear_system_state();

  // Work out how big we would have expected the frame to be at this Q given
  // the current correction factor.
  // Stay in double to avoid int overflow when values are large
  if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cpi->common.seg.enabled) {
    projected_size_based_on_q =
        vp9_cyclic_refresh_estimate_bits_at_q(cpi, rate_correction_factor);
  } else {
    projected_size_based_on_q =
        vp9_estimate_bits_at_q(cpi->common.frame_type, cm->base_qindex, cm->MBs,
                               rate_correction_factor, cm->bit_depth);
  }
  // Work out a size correction factor.
  if (projected_size_based_on_q > FRAME_OVERHEAD_BITS)
    correction_factor = (int)((100 * (int64_t)cpi->rc.projected_frame_size) /
                              projected_size_based_on_q);

  // More heavily damped adjustment used if we have been oscillating either side
  // of target.
  adjustment_limit =
      0.25 + 0.5 * VPXMIN(1, fabs(log10(0.01 * correction_factor)));

  cpi->rc.q_2_frame = cpi->rc.q_1_frame;
  cpi->rc.q_1_frame = cm->base_qindex;
  cpi->rc.rc_2_frame = cpi->rc.rc_1_frame;
  if (correction_factor > 110)
    cpi->rc.rc_1_frame = -1;
  else if (correction_factor < 90)
    cpi->rc.rc_1_frame = 1;
  else
    cpi->rc.rc_1_frame = 0;

  // Turn off oscilation detection in the case of massive overshoot.
  if (cpi->rc.rc_1_frame == -1 && cpi->rc.rc_2_frame == 1 &&
      correction_factor > 1000) {
    cpi->rc.rc_2_frame = 0;
  }

  if (correction_factor > 102) {
    // We are not already at the worst allowable quality
    correction_factor =
        (int)(100 + ((correction_factor - 100) * adjustment_limit));
    rate_correction_factor = (rate_correction_factor * correction_factor) / 100;
    // Keep rate_correction_factor within limits
    if (rate_correction_factor > MAX_BPB_FACTOR)
      rate_correction_factor = MAX_BPB_FACTOR;
  } else if (correction_factor < 99) {
    // We are not already at the best allowable quality
    correction_factor =
        (int)(100 - ((100 - correction_factor) * adjustment_limit));
    rate_correction_factor = (rate_correction_factor * correction_factor) / 100;

    // Keep rate_correction_factor within limits
    if (rate_correction_factor < MIN_BPB_FACTOR)
      rate_correction_factor = MIN_BPB_FACTOR;
  }

  set_rate_correction_factor(cpi, rate_correction_factor);
}

int vp9_rc_regulate_q(const VP9_COMP *cpi, int target_bits_per_frame,
                      int active_best_quality, int active_worst_quality) {
  const VP9_COMMON *const cm = &cpi->common;
  int q = active_worst_quality;
  int last_error = INT_MAX;
  int i, target_bits_per_mb, bits_per_mb_at_this_q;
  const double correction_factor = get_rate_correction_factor(cpi);

  // Calculate required scaling factor based on target frame size and size of
  // frame produced using previous Q.
  target_bits_per_mb =
      (int)(((uint64_t)target_bits_per_frame << BPER_MB_NORMBITS) / cm->MBs);

  i = active_best_quality;

  do {
    if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cm->seg.enabled &&
        cpi->svc.temporal_layer_id == 0) {
      bits_per_mb_at_this_q =
          (int)vp9_cyclic_refresh_rc_bits_per_mb(cpi, i, correction_factor);
    } else {
      bits_per_mb_at_this_q = (int)vp9_rc_bits_per_mb(
          cm->frame_type, i, correction_factor, cm->bit_depth);
    }

    if (bits_per_mb_at_this_q <= target_bits_per_mb) {
      if ((target_bits_per_mb - bits_per_mb_at_this_q) <= last_error)
        q = i;
      else
        q = i - 1;

      break;
    } else {
      last_error = bits_per_mb_at_this_q - target_bits_per_mb;
    }
  } while (++i <= active_worst_quality);

  // In CBR mode, this makes sure q is between oscillating Qs to prevent
  // resonance.
  if (cpi->oxcf.rc_mode == VPX_CBR &&
      (cpi->rc.rc_1_frame * cpi->rc.rc_2_frame == -1) &&
      cpi->rc.q_1_frame != cpi->rc.q_2_frame) {
    q = clamp(q, VPXMIN(cpi->rc.q_1_frame, cpi->rc.q_2_frame),
              VPXMAX(cpi->rc.q_1_frame, cpi->rc.q_2_frame));
  }
  return q;
}

static int get_active_quality(int q, int gfu_boost, int low, int high,
                              int *low_motion_minq, int *high_motion_minq) {
  if (gfu_boost > high) {
    return low_motion_minq[q];
  } else if (gfu_boost < low) {
    return high_motion_minq[q];
  } else {
    const int gap = high - low;
    const int offset = high - gfu_boost;
    const int qdiff = high_motion_minq[q] - low_motion_minq[q];
    const int adjustment = ((offset * qdiff) + (gap >> 1)) / gap;
    return low_motion_minq[q] + adjustment;
  }
}

static int get_kf_active_quality(const RATE_CONTROL *const rc, int q,
                                 vpx_bit_depth_t bit_depth) {
  int *kf_low_motion_minq;
  int *kf_high_motion_minq;
  ASSIGN_MINQ_TABLE(bit_depth, kf_low_motion_minq);
  ASSIGN_MINQ_TABLE(bit_depth, kf_high_motion_minq);
  return get_active_quality(q, rc->kf_boost, kf_low, kf_high,
                            kf_low_motion_minq, kf_high_motion_minq);
}

static int get_gf_active_quality(const RATE_CONTROL *const rc, int q,
                                 vpx_bit_depth_t bit_depth) {
  int *arfgf_low_motion_minq;
  int *arfgf_high_motion_minq;
  ASSIGN_MINQ_TABLE(bit_depth, arfgf_low_motion_minq);
  ASSIGN_MINQ_TABLE(bit_depth, arfgf_high_motion_minq);
  return get_active_quality(q, rc->gfu_boost, gf_low, gf_high,
                            arfgf_low_motion_minq, arfgf_high_motion_minq);
}

static int calc_active_worst_quality_one_pass_vbr(const VP9_COMP *cpi) {
  const RATE_CONTROL *const rc = &cpi->rc;
  const unsigned int curr_frame = cpi->common.current_video_frame;
  int active_worst_quality;

  if (cpi->common.frame_type == KEY_FRAME) {
    active_worst_quality =
        curr_frame == 0 ? rc->worst_quality : rc->last_q[KEY_FRAME] << 1;
  } else {
    if (!rc->is_src_frame_alt_ref &&
        (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame)) {
      active_worst_quality =
          curr_frame == 1
              ? rc->last_q[KEY_FRAME] * 5 >> 2
              : rc->last_q[INTER_FRAME] * rc->fac_active_worst_gf / 100;
    } else {
      active_worst_quality = curr_frame == 1
                                 ? rc->last_q[KEY_FRAME] << 1
                                 : rc->avg_frame_qindex[INTER_FRAME] *
                                       rc->fac_active_worst_inter / 100;
    }
  }
  return VPXMIN(active_worst_quality, rc->worst_quality);
}

// Adjust active_worst_quality level based on buffer level.
static int calc_active_worst_quality_one_pass_cbr(const VP9_COMP *cpi) {
  // Adjust active_worst_quality: If buffer is above the optimal/target level,
  // bring active_worst_quality down depending on fullness of buffer.
  // If buffer is below the optimal level, let the active_worst_quality go from
  // ambient Q (at buffer = optimal level) to worst_quality level
  // (at buffer = critical level).
  const VP9_COMMON *const cm = &cpi->common;
  const RATE_CONTROL *rc = &cpi->rc;
  // Buffer level below which we push active_worst to worst_quality.
  int64_t critical_level = rc->optimal_buffer_level >> 3;
  int64_t buff_lvl_step = 0;
  int adjustment = 0;
  int active_worst_quality;
  int ambient_qp;
  unsigned int num_frames_weight_key = 5 * cpi->svc.number_temporal_layers;
  if (cm->frame_type == KEY_FRAME) return rc->worst_quality;
  // For ambient_qp we use minimum of avg_frame_qindex[KEY_FRAME/INTER_FRAME]
  // for the first few frames following key frame. These are both initialized
  // to worst_quality and updated with (3/4, 1/4) average in postencode_update.
  // So for first few frames following key, the qp of that key frame is weighted
  // into the active_worst_quality setting.
  ambient_qp = (cm->current_video_frame < num_frames_weight_key)
                   ? VPXMIN(rc->avg_frame_qindex[INTER_FRAME],
                            rc->avg_frame_qindex[KEY_FRAME])
                   : rc->avg_frame_qindex[INTER_FRAME];
  active_worst_quality = VPXMIN(rc->worst_quality, ambient_qp * 5 >> 2);
  if (rc->buffer_level > rc->optimal_buffer_level) {
    // Adjust down.
    // Maximum limit for down adjustment, ~30%.
    int max_adjustment_down = active_worst_quality / 3;
    if (max_adjustment_down) {
      buff_lvl_step = ((rc->maximum_buffer_size - rc->optimal_buffer_level) /
                       max_adjustment_down);
      if (buff_lvl_step)
        adjustment = (int)((rc->buffer_level - rc->optimal_buffer_level) /
                           buff_lvl_step);
      active_worst_quality -= adjustment;
    }
  } else if (rc->buffer_level > critical_level) {
    // Adjust up from ambient Q.
    if (critical_level) {
      buff_lvl_step = (rc->optimal_buffer_level - critical_level);
      if (buff_lvl_step) {
        adjustment = (int)((rc->worst_quality - ambient_qp) *
                           (rc->optimal_buffer_level - rc->buffer_level) /
                           buff_lvl_step);
      }
      active_worst_quality = ambient_qp + adjustment;
    }
  } else {
    // Set to worst_quality if buffer is below critical level.
    active_worst_quality = rc->worst_quality;
  }
  return active_worst_quality;
}

static int rc_pick_q_and_bounds_one_pass_cbr(const VP9_COMP *cpi,
                                             int *bottom_index,
                                             int *top_index) {
  const VP9_COMMON *const cm = &cpi->common;
  const RATE_CONTROL *const rc = &cpi->rc;
  int active_best_quality;
  int active_worst_quality = calc_active_worst_quality_one_pass_cbr(cpi);
  int q;
  int *rtc_minq;
  ASSIGN_MINQ_TABLE(cm->bit_depth, rtc_minq);

  if (frame_is_intra_only(cm)) {
    active_best_quality = rc->best_quality;
    // Handle the special case for key frames forced when we have reached
    // the maximum key frame interval. Here force the Q to a range
    // based on the ambient Q to reduce the risk of popping.
    if (rc->this_key_frame_forced) {
      int qindex = rc->last_boosted_qindex;
      double last_boosted_q = vp9_convert_qindex_to_q(qindex, cm->bit_depth);
      int delta_qindex = vp9_compute_qdelta(
          rc, last_boosted_q, (last_boosted_q * 0.75), cm->bit_depth);
      active_best_quality = VPXMAX(qindex + delta_qindex, rc->best_quality);
    } else if (cm->current_video_frame > 0) {
      // not first frame of one pass and kf_boost is set
      double q_adj_factor = 1.0;
      double q_val;

      active_best_quality = get_kf_active_quality(
          rc, rc->avg_frame_qindex[KEY_FRAME], cm->bit_depth);

      // Allow somewhat lower kf minq with small image formats.
      if ((cm->width * cm->height) <= (352 * 288)) {
        q_adj_factor -= 0.25;
      }

      // Convert the adjustment factor to a qindex delta
      // on active_best_quality.
      q_val = vp9_convert_qindex_to_q(active_best_quality, cm->bit_depth);
      active_best_quality +=
          vp9_compute_qdelta(rc, q_val, q_val * q_adj_factor, cm->bit_depth);
    }
  } else if (!rc->is_src_frame_alt_ref && !cpi->use_svc &&
             (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame)) {
    // Use the lower of active_worst_quality and recent
    // average Q as basis for GF/ARF best Q limit unless last frame was
    // a key frame.
    if (rc->frames_since_key > 1 &&
        rc->avg_frame_qindex[INTER_FRAME] < active_worst_quality) {
      q = rc->avg_frame_qindex[INTER_FRAME];
    } else {
      q = active_worst_quality;
    }
    active_best_quality = get_gf_active_quality(rc, q, cm->bit_depth);
  } else {
    // Use the lower of active_worst_quality and recent/average Q.
    if (cm->current_video_frame > 1) {
      if (rc->avg_frame_qindex[INTER_FRAME] < active_worst_quality)
        active_best_quality = rtc_minq[rc->avg_frame_qindex[INTER_FRAME]];
      else
        active_best_quality = rtc_minq[active_worst_quality];
    } else {
      if (rc->avg_frame_qindex[KEY_FRAME] < active_worst_quality)
        active_best_quality = rtc_minq[rc->avg_frame_qindex[KEY_FRAME]];
      else
        active_best_quality = rtc_minq[active_worst_quality];
    }
  }

  // Clip the active best and worst quality values to limits
  active_best_quality =
      clamp(active_best_quality, rc->best_quality, rc->worst_quality);
  active_worst_quality =
      clamp(active_worst_quality, active_best_quality, rc->worst_quality);

  *top_index = active_worst_quality;
  *bottom_index = active_best_quality;

#if LIMIT_QRANGE_FOR_ALTREF_AND_KEY
  // Limit Q range for the adaptive loop.
  if (cm->frame_type == KEY_FRAME && !rc->this_key_frame_forced &&
      !(cm->current_video_frame == 0)) {
    int qdelta = 0;
    vpx_clear_system_state();
    qdelta = vp9_compute_qdelta_by_rate(
        &cpi->rc, cm->frame_type, active_worst_quality, 2.0, cm->bit_depth);
    *top_index = active_worst_quality + qdelta;
    *top_index = (*top_index > *bottom_index) ? *top_index : *bottom_index;
  }
#endif

  // Special case code to try and match quality with forced key frames
  if (cm->frame_type == KEY_FRAME && rc->this_key_frame_forced) {
    q = rc->last_boosted_qindex;
  } else {
    q = vp9_rc_regulate_q(cpi, rc->this_frame_target, active_best_quality,
                          active_worst_quality);
    if (q > *top_index) {
      // Special case when we are targeting the max allowed rate
      if (rc->this_frame_target >= rc->max_frame_bandwidth)
        *top_index = q;
      else
        q = *top_index;
    }
  }
  assert(*top_index <= rc->worst_quality && *top_index >= rc->best_quality);
  assert(*bottom_index <= rc->worst_quality &&
         *bottom_index >= rc->best_quality);
  assert(q <= rc->worst_quality && q >= rc->best_quality);
  return q;
}

static int get_active_cq_level_one_pass(const RATE_CONTROL *rc,
                                        const VP9EncoderConfig *const oxcf) {
  static const double cq_adjust_threshold = 0.1;
  int active_cq_level = oxcf->cq_level;
  if (oxcf->rc_mode == VPX_CQ && rc->total_target_bits > 0) {
    const double x = (double)rc->total_actual_bits / rc->total_target_bits;
    if (x < cq_adjust_threshold) {
      active_cq_level = (int)(active_cq_level * x / cq_adjust_threshold);
    }
  }
  return active_cq_level;
}

#define SMOOTH_PCT_MIN 0.1
#define SMOOTH_PCT_DIV 0.05
static int get_active_cq_level_two_pass(const TWO_PASS *twopass,
                                        const RATE_CONTROL *rc,
                                        const VP9EncoderConfig *const oxcf) {
  static const double cq_adjust_threshold = 0.1;
  int active_cq_level = oxcf->cq_level;
  if (oxcf->rc_mode == VPX_CQ) {
    if (twopass->mb_smooth_pct > SMOOTH_PCT_MIN) {
      active_cq_level -=
          (int)((twopass->mb_smooth_pct - SMOOTH_PCT_MIN) / SMOOTH_PCT_DIV);
      active_cq_level = VPXMAX(active_cq_level, 0);
    }
    if (rc->total_target_bits > 0) {
      const double x = (double)rc->total_actual_bits / rc->total_target_bits;
      if (x < cq_adjust_threshold) {
        active_cq_level = (int)(active_cq_level * x / cq_adjust_threshold);
      }
    }
  }
  return active_cq_level;
}

static int rc_pick_q_and_bounds_one_pass_vbr(const VP9_COMP *cpi,
                                             int *bottom_index,
                                             int *top_index) {
  const VP9_COMMON *const cm = &cpi->common;
  const RATE_CONTROL *const rc = &cpi->rc;
  const VP9EncoderConfig *const oxcf = &cpi->oxcf;
  const int cq_level = get_active_cq_level_one_pass(rc, oxcf);
  int active_best_quality;
  int active_worst_quality = calc_active_worst_quality_one_pass_vbr(cpi);
  int q;
  int *inter_minq;
  ASSIGN_MINQ_TABLE(cm->bit_depth, inter_minq);

  if (frame_is_intra_only(cm)) {
    if (oxcf->rc_mode == VPX_Q) {
      int qindex = cq_level;
      double q = vp9_convert_qindex_to_q(qindex, cm->bit_depth);
      int delta_qindex = vp9_compute_qdelta(rc, q, q * 0.25, cm->bit_depth);
      active_best_quality = VPXMAX(qindex + delta_qindex, rc->best_quality);
    } else if (rc->this_key_frame_forced) {
      // Handle the special case for key frames forced when we have reached
      // the maximum key frame interval. Here force the Q to a range
      // based on the ambient Q to reduce the risk of popping.
      int qindex = rc->last_boosted_qindex;
      double last_boosted_q = vp9_convert_qindex_to_q(qindex, cm->bit_depth);
      int delta_qindex = vp9_compute_qdelta(
          rc, last_boosted_q, last_boosted_q * 0.75, cm->bit_depth);
      active_best_quality = VPXMAX(qindex + delta_qindex, rc->best_quality);
    } else {
      // not first frame of one pass and kf_boost is set
      double q_adj_factor = 1.0;
      double q_val;

      active_best_quality = get_kf_active_quality(
          rc, rc->avg_frame_qindex[KEY_FRAME], cm->bit_depth);

      // Allow somewhat lower kf minq with small image formats.
      if ((cm->width * cm->height) <= (352 * 288)) {
        q_adj_factor -= 0.25;
      }

      // Convert the adjustment factor to a qindex delta
      // on active_best_quality.
      q_val = vp9_convert_qindex_to_q(active_best_quality, cm->bit_depth);
      active_best_quality +=
          vp9_compute_qdelta(rc, q_val, q_val * q_adj_factor, cm->bit_depth);
    }
  } else if (!rc->is_src_frame_alt_ref &&
             (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame)) {
    // Use the lower of active_worst_quality and recent
    // average Q as basis for GF/ARF best Q limit unless last frame was
    // a key frame.
    if (rc->frames_since_key > 1) {
      if (rc->avg_frame_qindex[INTER_FRAME] < active_worst_quality) {
        q = rc->avg_frame_qindex[INTER_FRAME];
      } else {
        q = active_worst_quality;
      }
    } else {
      q = rc->avg_frame_qindex[KEY_FRAME];
    }
    // For constrained quality dont allow Q less than the cq level
    if (oxcf->rc_mode == VPX_CQ) {
      if (q < cq_level) q = cq_level;

      active_best_quality = get_gf_active_quality(rc, q, cm->bit_depth);

      // Constrained quality use slightly lower active best.
      active_best_quality = active_best_quality * 15 / 16;

    } else if (oxcf->rc_mode == VPX_Q) {
      int qindex = cq_level;
      double q = vp9_convert_qindex_to_q(qindex, cm->bit_depth);
      int delta_qindex;
      if (cpi->refresh_alt_ref_frame)
        delta_qindex = vp9_compute_qdelta(rc, q, q * 0.40, cm->bit_depth);
      else
        delta_qindex = vp9_compute_qdelta(rc, q, q * 0.50, cm->bit_depth);
      active_best_quality = VPXMAX(qindex + delta_qindex, rc->best_quality);
    } else {
      active_best_quality = get_gf_active_quality(rc, q, cm->bit_depth);
    }
  } else {
    if (oxcf->rc_mode == VPX_Q) {
      int qindex = cq_level;
      double q = vp9_convert_qindex_to_q(qindex, cm->bit_depth);
      double delta_rate[FIXED_GF_INTERVAL] = { 0.50, 1.0, 0.85, 1.0,
                                               0.70, 1.0, 0.85, 1.0 };
      int delta_qindex = vp9_compute_qdelta(
          rc, q, q * delta_rate[cm->current_video_frame % FIXED_GF_INTERVAL],
          cm->bit_depth);
      active_best_quality = VPXMAX(qindex + delta_qindex, rc->best_quality);
    } else {
      // Use the min of the average Q and active_worst_quality as basis for
      // active_best.
      if (cm->current_video_frame > 1) {
        q = VPXMIN(rc->avg_frame_qindex[INTER_FRAME], active_worst_quality);
        active_best_quality = inter_minq[q];
      } else {
        active_best_quality = inter_minq[rc->avg_frame_qindex[KEY_FRAME]];
      }
      // For the constrained quality mode we don't want
      // q to fall below the cq level.
      if ((oxcf->rc_mode == VPX_CQ) && (active_best_quality < cq_level)) {
        active_best_quality = cq_level;
      }
    }
  }

  // Clip the active best and worst quality values to limits
  active_best_quality =
      clamp(active_best_quality, rc->best_quality, rc->worst_quality);
  active_worst_quality =
      clamp(active_worst_quality, active_best_quality, rc->worst_quality);

  *top_index = active_worst_quality;
  *bottom_index = active_best_quality;

#if LIMIT_QRANGE_FOR_ALTREF_AND_KEY
  {
    int qdelta = 0;
    vpx_clear_system_state();

    // Limit Q range for the adaptive loop.
    if (cm->frame_type == KEY_FRAME && !rc->this_key_frame_forced &&
        !(cm->current_video_frame == 0)) {
      qdelta = vp9_compute_qdelta_by_rate(
          &cpi->rc, cm->frame_type, active_worst_quality, 2.0, cm->bit_depth);
    } else if (!rc->is_src_frame_alt_ref &&
               (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame)) {
      qdelta = vp9_compute_qdelta_by_rate(
          &cpi->rc, cm->frame_type, active_worst_quality, 1.75, cm->bit_depth);
    }
    *top_index = active_worst_quality + qdelta;
    *top_index = (*top_index > *bottom_index) ? *top_index : *bottom_index;
  }
#endif

  if (oxcf->rc_mode == VPX_Q) {
    q = active_best_quality;
    // Special case code to try and match quality with forced key frames
  } else if ((cm->frame_type == KEY_FRAME) && rc->this_key_frame_forced) {
    q = rc->last_boosted_qindex;
  } else {
    q = vp9_rc_regulate_q(cpi, rc->this_frame_target, active_best_quality,
                          active_worst_quality);
    if (q > *top_index) {
      // Special case when we are targeting the max allowed rate
      if (rc->this_frame_target >= rc->max_frame_bandwidth)
        *top_index = q;
      else
        q = *top_index;
    }
  }

  assert(*top_index <= rc->worst_quality && *top_index >= rc->best_quality);
  assert(*bottom_index <= rc->worst_quality &&
         *bottom_index >= rc->best_quality);
  assert(q <= rc->worst_quality && q >= rc->best_quality);
  return q;
}

int vp9_frame_type_qdelta(const VP9_COMP *cpi, int rf_level, int q) {
  static const double rate_factor_deltas[RATE_FACTOR_LEVELS] = {
    1.00,  // INTER_NORMAL
    1.00,  // INTER_HIGH
    1.50,  // GF_ARF_LOW
    1.75,  // GF_ARF_STD
    2.00,  // KF_STD
  };
  static const FRAME_TYPE frame_type[RATE_FACTOR_LEVELS] = {
    INTER_FRAME, INTER_FRAME, INTER_FRAME, INTER_FRAME, KEY_FRAME
  };
  const VP9_COMMON *const cm = &cpi->common;
  int qdelta =
      vp9_compute_qdelta_by_rate(&cpi->rc, frame_type[rf_level], q,
                                 rate_factor_deltas[rf_level], cm->bit_depth);
  return qdelta;
}

#define STATIC_MOTION_THRESH 95
static int rc_pick_q_and_bounds_two_pass(const VP9_COMP *cpi, int *bottom_index,
                                         int *top_index) {
  const VP9_COMMON *const cm = &cpi->common;
  const RATE_CONTROL *const rc = &cpi->rc;
  const VP9EncoderConfig *const oxcf = &cpi->oxcf;
  const GF_GROUP *gf_group = &cpi->twopass.gf_group;
  const int cq_level = get_active_cq_level_two_pass(&cpi->twopass, rc, oxcf);
  int active_best_quality;
  int active_worst_quality = cpi->twopass.active_worst_quality;
  int q;
  int *inter_minq;
  ASSIGN_MINQ_TABLE(cm->bit_depth, inter_minq);

  if (frame_is_intra_only(cm) || vp9_is_upper_layer_key_frame(cpi)) {
    // Handle the special case for key frames forced when we have reached
    // the maximum key frame interval. Here force the Q to a range
    // based on the ambient Q to reduce the risk of popping.
    if (rc->this_key_frame_forced) {
      double last_boosted_q;
      int delta_qindex;
      int qindex;

      if (cpi->twopass.last_kfgroup_zeromotion_pct >= STATIC_MOTION_THRESH) {
        qindex = VPXMIN(rc->last_kf_qindex, rc->last_boosted_qindex);
        active_best_quality = qindex;
        last_boosted_q = vp9_convert_qindex_to_q(qindex, cm->bit_depth);
        delta_qindex = vp9_compute_qdelta(rc, last_boosted_q,
                                          last_boosted_q * 1.25, cm->bit_depth);
        active_worst_quality =
            VPXMIN(qindex + delta_qindex, active_worst_quality);
      } else {
        qindex = rc->last_boosted_qindex;
        last_boosted_q = vp9_convert_qindex_to_q(qindex, cm->bit_depth);
        delta_qindex = vp9_compute_qdelta(rc, last_boosted_q,
                                          last_boosted_q * 0.75, cm->bit_depth);
        active_best_quality = VPXMAX(qindex + delta_qindex, rc->best_quality);
      }
    } else {
      // Not forced keyframe.
      double q_adj_factor = 1.0;
      double q_val;
      // Baseline value derived from cpi->active_worst_quality and kf boost.
      active_best_quality =
          get_kf_active_quality(rc, active_worst_quality, cm->bit_depth);

      // Allow somewhat lower kf minq with small image formats.
      if ((cm->width * cm->height) <= (352 * 288)) {
        q_adj_factor -= 0.25;
      }

      // Make a further adjustment based on the kf zero motion measure.
      q_adj_factor += 0.05 - (0.001 * (double)cpi->twopass.kf_zeromotion_pct);

      // Convert the adjustment factor to a qindex delta
      // on active_best_quality.
      q_val = vp9_convert_qindex_to_q(active_best_quality, cm->bit_depth);
      active_best_quality +=
          vp9_compute_qdelta(rc, q_val, q_val * q_adj_factor, cm->bit_depth);
    }
  } else if (!rc->is_src_frame_alt_ref &&
             (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame)) {
    // Use the lower of active_worst_quality and recent
    // average Q as basis for GF/ARF best Q limit unless last frame was
    // a key frame.
    if (rc->frames_since_key > 1 &&
        rc->avg_frame_qindex[INTER_FRAME] < active_worst_quality) {
      q = rc->avg_frame_qindex[INTER_FRAME];
    } else {
      q = active_worst_quality;
    }
    // For constrained quality dont allow Q less than the cq level
    if (oxcf->rc_mode == VPX_CQ) {
      if (q < cq_level) q = cq_level;

      active_best_quality = get_gf_active_quality(rc, q, cm->bit_depth);

      // Constrained quality use slightly lower active best.
      active_best_quality = active_best_quality * 15 / 16;

    } else if (oxcf->rc_mode == VPX_Q) {
      if (!cpi->refresh_alt_ref_frame) {
        active_best_quality = cq_level;
      } else {
        active_best_quality = get_gf_active_quality(rc, q, cm->bit_depth);

        // Modify best quality for second level arfs. For mode VPX_Q this
        // becomes the baseline frame q.
        if (gf_group->rf_level[gf_group->index] == GF_ARF_LOW)
          active_best_quality = (active_best_quality + cq_level + 1) / 2;
      }
    } else {
      active_best_quality = get_gf_active_quality(rc, q, cm->bit_depth);
    }
  } else {
    if (oxcf->rc_mode == VPX_Q) {
      active_best_quality = cq_level;
    } else {
      active_best_quality = inter_minq[active_worst_quality];

      // For the constrained quality mode we don't want
      // q to fall below the cq level.
      if ((oxcf->rc_mode == VPX_CQ) && (active_best_quality < cq_level)) {
        active_best_quality = cq_level;
      }
    }
  }

  // Extension to max or min Q if undershoot or overshoot is outside
  // the permitted range.
  if (cpi->oxcf.rc_mode != VPX_Q) {
    if (frame_is_intra_only(cm) ||
        (!rc->is_src_frame_alt_ref &&
         (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame))) {
      active_best_quality -=
          (cpi->twopass.extend_minq + cpi->twopass.extend_minq_fast);
      active_worst_quality += (cpi->twopass.extend_maxq / 2);
    } else {
      active_best_quality -=
          (cpi->twopass.extend_minq + cpi->twopass.extend_minq_fast) / 2;
      active_worst_quality += cpi->twopass.extend_maxq;
    }
  }

#if LIMIT_QRANGE_FOR_ALTREF_AND_KEY
  vpx_clear_system_state();
  // Static forced key frames Q restrictions dealt with elsewhere.
  if (!((frame_is_intra_only(cm) || vp9_is_upper_layer_key_frame(cpi))) ||
      !rc->this_key_frame_forced ||
      (cpi->twopass.last_kfgroup_zeromotion_pct < STATIC_MOTION_THRESH)) {
    int qdelta = vp9_frame_type_qdelta(cpi, gf_group->rf_level[gf_group->index],
                                       active_worst_quality);
    active_worst_quality =
        VPXMAX(active_worst_quality + qdelta, active_best_quality);
  }
#endif

  // Modify active_best_quality for downscaled normal frames.
  if (rc->frame_size_selector != UNSCALED && !frame_is_kf_gf_arf(cpi)) {
    int qdelta = vp9_compute_qdelta_by_rate(
        rc, cm->frame_type, active_best_quality, 2.0, cm->bit_depth);
    active_best_quality =
        VPXMAX(active_best_quality + qdelta, rc->best_quality);
  }

  active_best_quality =
      clamp(active_best_quality, rc->best_quality, rc->worst_quality);
  active_worst_quality =
      clamp(active_worst_quality, active_best_quality, rc->worst_quality);

  if (oxcf->rc_mode == VPX_Q) {
    q = active_best_quality;
    // Special case code to try and match quality with forced key frames.
  } else if ((frame_is_intra_only(cm) || vp9_is_upper_layer_key_frame(cpi)) &&
             rc->this_key_frame_forced) {
    // If static since last kf use better of last boosted and last kf q.
    if (cpi->twopass.last_kfgroup_zeromotion_pct >= STATIC_MOTION_THRESH) {
      q = VPXMIN(rc->last_kf_qindex, rc->last_boosted_qindex);
    } else {
      q = rc->last_boosted_qindex;
    }
  } else {
    q = vp9_rc_regulate_q(cpi, rc->this_frame_target, active_best_quality,
                          active_worst_quality);
    if (q > active_worst_quality) {
      // Special case when we are targeting the max allowed rate.
      if (rc->this_frame_target >= rc->max_frame_bandwidth)
        active_worst_quality = q;
      else
        q = active_worst_quality;
    }
  }
  clamp(q, active_best_quality, active_worst_quality);

  *top_index = active_worst_quality;
  *bottom_index = active_best_quality;

  assert(*top_index <= rc->worst_quality && *top_index >= rc->best_quality);
  assert(*bottom_index <= rc->worst_quality &&
         *bottom_index >= rc->best_quality);
  assert(q <= rc->worst_quality && q >= rc->best_quality);
  return q;
}

int vp9_rc_pick_q_and_bounds(const VP9_COMP *cpi, int *bottom_index,
                             int *top_index) {
  int q;
  if (cpi->oxcf.pass == 0) {
    if (cpi->oxcf.rc_mode == VPX_CBR)
      q = rc_pick_q_and_bounds_one_pass_cbr(cpi, bottom_index, top_index);
    else
      q = rc_pick_q_and_bounds_one_pass_vbr(cpi, bottom_index, top_index);
  } else {
    q = rc_pick_q_and_bounds_two_pass(cpi, bottom_index, top_index);
  }
  if (cpi->sf.use_nonrd_pick_mode) {
    if (cpi->sf.force_frame_boost == 1) q -= cpi->sf.max_delta_qindex;

    if (q < *bottom_index)
      *bottom_index = q;
    else if (q > *top_index)
      *top_index = q;
  }
  return q;
}

void vp9_rc_compute_frame_size_bounds(const VP9_COMP *cpi, int frame_target,
                                      int *frame_under_shoot_limit,
                                      int *frame_over_shoot_limit) {
  if (cpi->oxcf.rc_mode == VPX_Q) {
    *frame_under_shoot_limit = 0;
    *frame_over_shoot_limit = INT_MAX;
  } else {
    // For very small rate targets where the fractional adjustment
    // may be tiny make sure there is at least a minimum range.
    const int tol_low = (cpi->sf.recode_tolerance_low * frame_target) / 100;
    const int tol_high = (cpi->sf.recode_tolerance_high * frame_target) / 100;
    *frame_under_shoot_limit = VPXMAX(frame_target - tol_low - 100, 0);
    *frame_over_shoot_limit =
        VPXMIN(frame_target + tol_high + 100, cpi->rc.max_frame_bandwidth);
  }
}

void vp9_rc_set_frame_target(VP9_COMP *cpi, int target) {
  const VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;

  rc->this_frame_target = target;

  // Modify frame size target when down-scaling.
  if (cpi->oxcf.resize_mode == RESIZE_DYNAMIC &&
      rc->frame_size_selector != UNSCALED)
    rc->this_frame_target = (int)(rc->this_frame_target *
                                  rate_thresh_mult[rc->frame_size_selector]);

  // Target rate per SB64 (including partial SB64s.
  rc->sb64_target_rate = (int)(((int64_t)rc->this_frame_target * 64 * 64) /
                               (cm->width * cm->height));
}

static void update_alt_ref_frame_stats(VP9_COMP *cpi) {
  // this frame refreshes means next frames don't unless specified by user
  RATE_CONTROL *const rc = &cpi->rc;
  rc->frames_since_golden = 0;

  // Mark the alt ref as done (setting to 0 means no further alt refs pending).
  rc->source_alt_ref_pending = 0;

  // Set the alternate reference frame active flag
  rc->source_alt_ref_active = 1;
}

static void update_golden_frame_stats(VP9_COMP *cpi) {
  RATE_CONTROL *const rc = &cpi->rc;

  // Update the Golden frame usage counts.
  if (cpi->refresh_golden_frame) {
    // this frame refreshes means next frames don't unless specified by user
    rc->frames_since_golden = 0;

    // If we are not using alt ref in the up and coming group clear the arf
    // active flag. In multi arf group case, if the index is not 0 then
    // we are overlaying a mid group arf so should not reset the flag.
    if (cpi->oxcf.pass == 2) {
      if (!rc->source_alt_ref_pending && (cpi->twopass.gf_group.index == 0))
        rc->source_alt_ref_active = 0;
    } else if (!rc->source_alt_ref_pending) {
      rc->source_alt_ref_active = 0;
    }

    // Decrement count down till next gf
    if (rc->frames_till_gf_update_due > 0) rc->frames_till_gf_update_due--;

  } else if (!cpi->refresh_alt_ref_frame) {
    // Decrement count down till next gf
    if (rc->frames_till_gf_update_due > 0) rc->frames_till_gf_update_due--;

    rc->frames_since_golden++;
  }
}

static void compute_frame_low_motion(VP9_COMP *const cpi) {
  VP9_COMMON *const cm = &cpi->common;
  int mi_row, mi_col;
  MODE_INFO **mi = cm->mi_grid_visible;
  RATE_CONTROL *const rc = &cpi->rc;
  const int rows = cm->mi_rows, cols = cm->mi_cols;
  int cnt_zeromv = 0;
  for (mi_row = 0; mi_row < rows; mi_row++) {
    for (mi_col = 0; mi_col < cols; mi_col++) {
      if (abs(mi[0]->mv[0].as_mv.row) < 16 && abs(mi[0]->mv[0].as_mv.col) < 16)
        cnt_zeromv++;
      mi++;
    }
    mi += 8;
  }
  cnt_zeromv = 100 * cnt_zeromv / (rows * cols);
  rc->avg_frame_low_motion = (3 * rc->avg_frame_low_motion + cnt_zeromv) >> 2;
}

void vp9_rc_postencode_update(VP9_COMP *cpi, uint64_t bytes_used) {
  const VP9_COMMON *const cm = &cpi->common;
  const VP9EncoderConfig *const oxcf = &cpi->oxcf;
  RATE_CONTROL *const rc = &cpi->rc;
  const int qindex = cm->base_qindex;

  if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cm->seg.enabled) {
    vp9_cyclic_refresh_postencode(cpi);
  }

  // Update rate control heuristics
  rc->projected_frame_size = (int)(bytes_used << 3);

  // Post encode loop adjustment of Q prediction.
  vp9_rc_update_rate_correction_factors(cpi);

  // Keep a record of last Q and ambient average Q.
  if (cm->frame_type == KEY_FRAME) {
    rc->last_q[KEY_FRAME] = qindex;
    rc->avg_frame_qindex[KEY_FRAME] =
        ROUND_POWER_OF_TWO(3 * rc->avg_frame_qindex[KEY_FRAME] + qindex, 2);
    if (cpi->use_svc) {
      int i = 0;
      SVC *svc = &cpi->svc;
      for (i = 0; i < svc->number_temporal_layers; ++i) {
        const int layer = LAYER_IDS_TO_IDX(svc->spatial_layer_id, i,
                                           svc->number_temporal_layers);
        LAYER_CONTEXT *lc = &svc->layer_context[layer];
        RATE_CONTROL *lrc = &lc->rc;
        lrc->last_q[KEY_FRAME] = rc->last_q[KEY_FRAME];
        lrc->avg_frame_qindex[KEY_FRAME] = rc->avg_frame_qindex[KEY_FRAME];
      }
    }
  } else {
    if ((cpi->use_svc && oxcf->rc_mode == VPX_CBR) ||
        (!rc->is_src_frame_alt_ref &&
         !(cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame))) {
      rc->last_q[INTER_FRAME] = qindex;
      rc->avg_frame_qindex[INTER_FRAME] =
          ROUND_POWER_OF_TWO(3 * rc->avg_frame_qindex[INTER_FRAME] + qindex, 2);
      rc->ni_frames++;
      rc->tot_q += vp9_convert_qindex_to_q(qindex, cm->bit_depth);
      rc->avg_q = rc->tot_q / rc->ni_frames;
      // Calculate the average Q for normal inter frames (not key or GFU
      // frames).
      rc->ni_tot_qi += qindex;
      rc->ni_av_qi = rc->ni_tot_qi / rc->ni_frames;
    }
  }

  // Keep record of last boosted (KF/KF/ARF) Q value.
  // If the current frame is coded at a lower Q then we also update it.
  // If all mbs in this group are skipped only update if the Q value is
  // better than that already stored.
  // This is used to help set quality in forced key frames to reduce popping
  if ((qindex < rc->last_boosted_qindex) || (cm->frame_type == KEY_FRAME) ||
      (!rc->constrained_gf_group &&
       (cpi->refresh_alt_ref_frame ||
        (cpi->refresh_golden_frame && !rc->is_src_frame_alt_ref)))) {
    rc->last_boosted_qindex = qindex;
  }
  if (cm->frame_type == KEY_FRAME) rc->last_kf_qindex = qindex;

  update_buffer_level(cpi, rc->projected_frame_size);

  // Rolling monitors of whether we are over or underspending used to help
  // regulate min and Max Q in two pass.
  if (cm->frame_type != KEY_FRAME) {
    rc->rolling_target_bits = ROUND_POWER_OF_TWO(
        rc->rolling_target_bits * 3 + rc->this_frame_target, 2);
    rc->rolling_actual_bits = ROUND_POWER_OF_TWO(
        rc->rolling_actual_bits * 3 + rc->projected_frame_size, 2);
    rc->long_rolling_target_bits = ROUND_POWER_OF_TWO(
        rc->long_rolling_target_bits * 31 + rc->this_frame_target, 5);
    rc->long_rolling_actual_bits = ROUND_POWER_OF_TWO(
        rc->long_rolling_actual_bits * 31 + rc->projected_frame_size, 5);
  }

  // Actual bits spent
  rc->total_actual_bits += rc->projected_frame_size;
  rc->total_target_bits += cm->show_frame ? rc->avg_frame_bandwidth : 0;

  rc->total_target_vs_actual = rc->total_actual_bits - rc->total_target_bits;

  if (!cpi->use_svc || is_two_pass_svc(cpi)) {
    if (is_altref_enabled(cpi) && cpi->refresh_alt_ref_frame &&
        (cm->frame_type != KEY_FRAME))
      // Update the alternate reference frame stats as appropriate.
      update_alt_ref_frame_stats(cpi);
    else
      // Update the Golden frame stats as appropriate.
      update_golden_frame_stats(cpi);
  }

  if (cm->frame_type == KEY_FRAME) rc->frames_since_key = 0;
  if (cm->show_frame) {
    rc->frames_since_key++;
    rc->frames_to_key--;
  }

  // Trigger the resizing of the next frame if it is scaled.
  if (oxcf->pass != 0) {
    cpi->resize_pending =
        rc->next_frame_size_selector != rc->frame_size_selector;
    rc->frame_size_selector = rc->next_frame_size_selector;
  }

  if (oxcf->pass == 0) {
    if (cm->frame_type != KEY_FRAME) compute_frame_low_motion(cpi);
  }
}

void vp9_rc_postencode_update_drop_frame(VP9_COMP *cpi) {
  // Update buffer level with zero size, update frame counters, and return.
  update_buffer_level(cpi, 0);
  cpi->rc.frames_since_key++;
  cpi->rc.frames_to_key--;
  cpi->rc.rc_2_frame = 0;
  cpi->rc.rc_1_frame = 0;
}

// Use this macro to turn on/off use of alt-refs in one-pass mode.
#define USE_ALTREF_FOR_ONE_PASS 1

static int calc_pframe_target_size_one_pass_vbr(const VP9_COMP *const cpi) {
  const RATE_CONTROL *const rc = &cpi->rc;
  int target;
  const int af_ratio = rc->af_ratio_onepass_vbr;
#if USE_ALTREF_FOR_ONE_PASS
  target =
      (!rc->is_src_frame_alt_ref &&
       (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame))
          ? (rc->avg_frame_bandwidth * rc->baseline_gf_interval * af_ratio) /
                (rc->baseline_gf_interval + af_ratio - 1)
          : (rc->avg_frame_bandwidth * rc->baseline_gf_interval) /
                (rc->baseline_gf_interval + af_ratio - 1);
#else
  target = rc->avg_frame_bandwidth;
#endif
  return vp9_rc_clamp_pframe_target_size(cpi, target);
}

static int calc_iframe_target_size_one_pass_vbr(const VP9_COMP *const cpi) {
  static const int kf_ratio = 25;
  const RATE_CONTROL *rc = &cpi->rc;
  const int target = rc->avg_frame_bandwidth * kf_ratio;
  return vp9_rc_clamp_iframe_target_size(cpi, target);
}

static void adjust_gfint_frame_constraint(VP9_COMP *cpi, int frame_constraint) {
  RATE_CONTROL *const rc = &cpi->rc;
  rc->constrained_gf_group = 0;
  // Reset gf interval to make more equal spacing for frame_constraint.
  if ((frame_constraint <= 7 * rc->baseline_gf_interval >> 2) &&
      (frame_constraint > rc->baseline_gf_interval)) {
    rc->baseline_gf_interval = frame_constraint >> 1;
    if (rc->baseline_gf_interval < 5)
      rc->baseline_gf_interval = frame_constraint;
    rc->constrained_gf_group = 1;
  } else {
    // Reset to keep gf_interval <= frame_constraint.
    if (rc->baseline_gf_interval > frame_constraint) {
      rc->baseline_gf_interval = frame_constraint;
      rc->constrained_gf_group = 1;
    }
  }
}

void vp9_rc_get_one_pass_vbr_params(VP9_COMP *cpi) {
  VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;
  int target;
  // TODO(yaowu): replace the "auto_key && 0" below with proper decision logic.
  if (!cpi->refresh_alt_ref_frame &&
      (cm->current_video_frame == 0 || (cpi->frame_flags & FRAMEFLAGS_KEY) ||
       rc->frames_to_key == 0 || (cpi->oxcf.auto_key && 0))) {
    cm->frame_type = KEY_FRAME;
    rc->this_key_frame_forced =
        cm->current_video_frame != 0 && rc->frames_to_key == 0;
    rc->frames_to_key = cpi->oxcf.key_freq;
    rc->kf_boost = DEFAULT_KF_BOOST;
    rc->source_alt_ref_active = 0;
  } else {
    cm->frame_type = INTER_FRAME;
  }
  if (rc->frames_till_gf_update_due == 0) {
    double rate_err = 1.0;
    rc->gfu_boost = DEFAULT_GF_BOOST;
    if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cpi->oxcf.pass == 0) {
      vp9_cyclic_refresh_set_golden_update(cpi);
    } else {
      rc->baseline_gf_interval =
          (rc->min_gf_interval + rc->max_gf_interval) / 2;
    }
    rc->af_ratio_onepass_vbr = 10;
    if (rc->rolling_target_bits > 0)
      rate_err =
          (double)rc->rolling_actual_bits / (double)rc->rolling_target_bits;
    if (cm->current_video_frame > 30) {
      if (rc->avg_frame_qindex[INTER_FRAME] > (7 * rc->worst_quality) >> 3 &&
          rate_err > 3.5) {
        rc->baseline_gf_interval =
            VPXMIN(15, (3 * rc->baseline_gf_interval) >> 1);
      } else if (rc->avg_frame_low_motion < 20) {
        // Decrease gf interval for high motion case.
        rc->baseline_gf_interval = VPXMAX(6, rc->baseline_gf_interval >> 1);
      }
      // Adjust boost and af_ratio based on avg_frame_low_motion, which varies
      // between 0 and 100 (stationary, 100% zero/small motion).
      rc->gfu_boost =
          VPXMAX(500, DEFAULT_GF_BOOST * (rc->avg_frame_low_motion << 1) /
                          (rc->avg_frame_low_motion + 100));
      rc->af_ratio_onepass_vbr = VPXMIN(15, VPXMAX(5, 3 * rc->gfu_boost / 400));
    }
    adjust_gfint_frame_constraint(cpi, rc->frames_to_key);
    rc->frames_till_gf_update_due = rc->baseline_gf_interval;
    cpi->refresh_golden_frame = 1;
    rc->source_alt_ref_pending = USE_ALTREF_FOR_ONE_PASS;
  }
  if (cm->frame_type == KEY_FRAME)
    target = calc_iframe_target_size_one_pass_vbr(cpi);
  else
    target = calc_pframe_target_size_one_pass_vbr(cpi);
  vp9_rc_set_frame_target(cpi, target);
  if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cpi->oxcf.pass == 0)
    vp9_cyclic_refresh_update_parameters(cpi);
}

static int calc_pframe_target_size_one_pass_cbr(const VP9_COMP *cpi) {
  const VP9EncoderConfig *oxcf = &cpi->oxcf;
  const RATE_CONTROL *rc = &cpi->rc;
  const SVC *const svc = &cpi->svc;
  const int64_t diff = rc->optimal_buffer_level - rc->buffer_level;
  const int64_t one_pct_bits = 1 + rc->optimal_buffer_level / 100;
  int min_frame_target =
      VPXMAX(rc->avg_frame_bandwidth >> 4, FRAME_OVERHEAD_BITS);
  int target;

  if (oxcf->gf_cbr_boost_pct) {
    const int af_ratio_pct = oxcf->gf_cbr_boost_pct + 100;
    target = cpi->refresh_golden_frame
                 ? (rc->avg_frame_bandwidth * rc->baseline_gf_interval *
                    af_ratio_pct) /
                       (rc->baseline_gf_interval * 100 + af_ratio_pct - 100)
                 : (rc->avg_frame_bandwidth * rc->baseline_gf_interval * 100) /
                       (rc->baseline_gf_interval * 100 + af_ratio_pct - 100);
  } else {
    target = rc->avg_frame_bandwidth;
  }
  if (is_one_pass_cbr_svc(cpi)) {
    // Note that for layers, avg_frame_bandwidth is the cumulative
    // per-frame-bandwidth. For the target size of this frame, use the
    // layer average frame size (i.e., non-cumulative per-frame-bw).
    int layer = LAYER_IDS_TO_IDX(svc->spatial_layer_id, svc->temporal_layer_id,
                                 svc->number_temporal_layers);
    const LAYER_CONTEXT *lc = &svc->layer_context[layer];
    target = lc->avg_frame_size;
    min_frame_target = VPXMAX(lc->avg_frame_size >> 4, FRAME_OVERHEAD_BITS);
  }
  if (diff > 0) {
    // Lower the target bandwidth for this frame.
    const int pct_low = (int)VPXMIN(diff / one_pct_bits, oxcf->under_shoot_pct);
    target -= (target * pct_low) / 200;
  } else if (diff < 0) {
    // Increase the target bandwidth for this frame.
    const int pct_high =
        (int)VPXMIN(-diff / one_pct_bits, oxcf->over_shoot_pct);
    target += (target * pct_high) / 200;
  }
  if (oxcf->rc_max_inter_bitrate_pct) {
    const int max_rate =
        rc->avg_frame_bandwidth * oxcf->rc_max_inter_bitrate_pct / 100;
    target = VPXMIN(target, max_rate);
  }
  return VPXMAX(min_frame_target, target);
}

static int calc_iframe_target_size_one_pass_cbr(const VP9_COMP *cpi) {
  const RATE_CONTROL *rc = &cpi->rc;
  const VP9EncoderConfig *oxcf = &cpi->oxcf;
  const SVC *const svc = &cpi->svc;
  int target;
  if (cpi->common.current_video_frame == 0) {
    target = ((rc->starting_buffer_level / 2) > INT_MAX)
                 ? INT_MAX
                 : (int)(rc->starting_buffer_level / 2);
  } else {
    int kf_boost = 32;
    double framerate = cpi->framerate;
    if (svc->number_temporal_layers > 1 && oxcf->rc_mode == VPX_CBR) {
      // Use the layer framerate for temporal layers CBR mode.
      const int layer =
          LAYER_IDS_TO_IDX(svc->spatial_layer_id, svc->temporal_layer_id,
                           svc->number_temporal_layers);
      const LAYER_CONTEXT *lc = &svc->layer_context[layer];
      framerate = lc->framerate;
    }
    kf_boost = VPXMAX(kf_boost, (int)(2 * framerate - 16));
    if (rc->frames_since_key < framerate / 2) {
      kf_boost = (int)(kf_boost * rc->frames_since_key / (framerate / 2));
    }
    target = ((16 + kf_boost) * rc->avg_frame_bandwidth) >> 4;
  }
  return vp9_rc_clamp_iframe_target_size(cpi, target);
}

void vp9_rc_get_svc_params(VP9_COMP *cpi) {
  VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;
  int target = rc->avg_frame_bandwidth;
  int layer =
      LAYER_IDS_TO_IDX(cpi->svc.spatial_layer_id, cpi->svc.temporal_layer_id,
                       cpi->svc.number_temporal_layers);
  // Periodic key frames is based on the super-frame counter
  // (svc.current_superframe), also only base spatial layer is key frame.
  if ((cm->current_video_frame == 0) || (cpi->frame_flags & FRAMEFLAGS_KEY) ||
      (cpi->oxcf.auto_key &&
       (cpi->svc.current_superframe % cpi->oxcf.key_freq == 0) &&
       cpi->svc.spatial_layer_id == 0)) {
    cm->frame_type = KEY_FRAME;
    rc->source_alt_ref_active = 0;
    if (is_two_pass_svc(cpi)) {
      cpi->svc.layer_context[layer].is_key_frame = 1;
      cpi->ref_frame_flags &= (~VP9_LAST_FLAG & ~VP9_GOLD_FLAG & ~VP9_ALT_FLAG);
    } else if (is_one_pass_cbr_svc(cpi)) {
      if (cm->current_video_frame > 0) vp9_svc_reset_key_frame(cpi);
      layer = LAYER_IDS_TO_IDX(cpi->svc.spatial_layer_id,
                               cpi->svc.temporal_layer_id,
                               cpi->svc.number_temporal_layers);
      cpi->svc.layer_context[layer].is_key_frame = 1;
      cpi->ref_frame_flags &= (~VP9_LAST_FLAG & ~VP9_GOLD_FLAG & ~VP9_ALT_FLAG);
      // Assumption here is that LAST_FRAME is being updated for a keyframe.
      // Thus no change in update flags.
      target = calc_iframe_target_size_one_pass_cbr(cpi);
    }
  } else {
    cm->frame_type = INTER_FRAME;
    if (is_two_pass_svc(cpi)) {
      LAYER_CONTEXT *lc = &cpi->svc.layer_context[layer];
      if (cpi->svc.spatial_layer_id == 0) {
        lc->is_key_frame = 0;
      } else {
        lc->is_key_frame =
            cpi->svc.layer_context[cpi->svc.temporal_layer_id].is_key_frame;
        if (lc->is_key_frame) cpi->ref_frame_flags &= (~VP9_LAST_FLAG);
      }
      cpi->ref_frame_flags &= (~VP9_ALT_FLAG);
    } else if (is_one_pass_cbr_svc(cpi)) {
      LAYER_CONTEXT *lc = &cpi->svc.layer_context[layer];
      if (cpi->svc.spatial_layer_id == cpi->svc.first_spatial_layer_to_encode) {
        lc->is_key_frame = 0;
      } else {
        lc->is_key_frame =
            cpi->svc.layer_context[cpi->svc.temporal_layer_id].is_key_frame;
      }
      target = calc_pframe_target_size_one_pass_cbr(cpi);
    }
  }

  // Any update/change of global cyclic refresh parameters (amount/delta-qp)
  // should be done here, before the frame qp is selected.
  if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ)
    vp9_cyclic_refresh_update_parameters(cpi);

  vp9_rc_set_frame_target(cpi, target);
  rc->frames_till_gf_update_due = INT_MAX;
  rc->baseline_gf_interval = INT_MAX;
}

void vp9_rc_get_one_pass_cbr_params(VP9_COMP *cpi) {
  VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;
  int target;
  // TODO(yaowu): replace the "auto_key && 0" below with proper decision logic.
  if ((cm->current_video_frame == 0 || (cpi->frame_flags & FRAMEFLAGS_KEY) ||
       rc->frames_to_key == 0 || (cpi->oxcf.auto_key && 0))) {
    cm->frame_type = KEY_FRAME;
    rc->this_key_frame_forced =
        cm->current_video_frame != 0 && rc->frames_to_key == 0;
    rc->frames_to_key = cpi->oxcf.key_freq;
    rc->kf_boost = DEFAULT_KF_BOOST;
    rc->source_alt_ref_active = 0;
  } else {
    cm->frame_type = INTER_FRAME;
  }
  if (rc->frames_till_gf_update_due == 0) {
    if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ)
      vp9_cyclic_refresh_set_golden_update(cpi);
    else
      rc->baseline_gf_interval =
          (rc->min_gf_interval + rc->max_gf_interval) / 2;
    rc->frames_till_gf_update_due = rc->baseline_gf_interval;
    // NOTE: frames_till_gf_update_due must be <= frames_to_key.
    if (rc->frames_till_gf_update_due > rc->frames_to_key)
      rc->frames_till_gf_update_due = rc->frames_to_key;
    cpi->refresh_golden_frame = 1;
    rc->gfu_boost = DEFAULT_GF_BOOST;
  }

  // Any update/change of global cyclic refresh parameters (amount/delta-qp)
  // should be done here, before the frame qp is selected.
  if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ)
    vp9_cyclic_refresh_update_parameters(cpi);

  if (cm->frame_type == KEY_FRAME)
    target = calc_iframe_target_size_one_pass_cbr(cpi);
  else
    target = calc_pframe_target_size_one_pass_cbr(cpi);

  vp9_rc_set_frame_target(cpi, target);
  if (cpi->oxcf.resize_mode == RESIZE_DYNAMIC)
    cpi->resize_pending = vp9_resize_one_pass_cbr(cpi);
  else
    cpi->resize_pending = 0;
}

int vp9_compute_qdelta(const RATE_CONTROL *rc, double qstart, double qtarget,
                       vpx_bit_depth_t bit_depth) {
  int start_index = rc->worst_quality;
  int target_index = rc->worst_quality;
  int i;

  // Convert the average q value to an index.
  for (i = rc->best_quality; i < rc->worst_quality; ++i) {
    start_index = i;
    if (vp9_convert_qindex_to_q(i, bit_depth) >= qstart) break;
  }

  // Convert the q target to an index
  for (i = rc->best_quality; i < rc->worst_quality; ++i) {
    target_index = i;
    if (vp9_convert_qindex_to_q(i, bit_depth) >= qtarget) break;
  }

  return target_index - start_index;
}

int vp9_compute_qdelta_by_rate(const RATE_CONTROL *rc, FRAME_TYPE frame_type,
                               int qindex, double rate_target_ratio,
                               vpx_bit_depth_t bit_depth) {
  int target_index = rc->worst_quality;
  int i;

  // Look up the current projected bits per block for the base index
  const int base_bits_per_mb =
      vp9_rc_bits_per_mb(frame_type, qindex, 1.0, bit_depth);

  // Find the target bits per mb based on the base value and given ratio.
  const int target_bits_per_mb = (int)(rate_target_ratio * base_bits_per_mb);

  // Convert the q target to an index
  for (i = rc->best_quality; i < rc->worst_quality; ++i) {
    if (vp9_rc_bits_per_mb(frame_type, i, 1.0, bit_depth) <=
        target_bits_per_mb) {
      target_index = i;
      break;
    }
  }
  return target_index - qindex;
}

void vp9_rc_set_gf_interval_range(const VP9_COMP *const cpi,
                                  RATE_CONTROL *const rc) {
  const VP9EncoderConfig *const oxcf = &cpi->oxcf;

  // Special case code for 1 pass fixed Q mode tests
  if ((oxcf->pass == 0) && (oxcf->rc_mode == VPX_Q)) {
    rc->max_gf_interval = FIXED_GF_INTERVAL;
    rc->min_gf_interval = FIXED_GF_INTERVAL;
    rc->static_scene_max_gf_interval = FIXED_GF_INTERVAL;
  } else {
    // Set Maximum gf/arf interval
    rc->max_gf_interval = oxcf->max_gf_interval;
    rc->min_gf_interval = oxcf->min_gf_interval;
    if (rc->min_gf_interval == 0)
      rc->min_gf_interval = vp9_rc_get_default_min_gf_interval(
          oxcf->width, oxcf->height, cpi->framerate);
    if (rc->max_gf_interval == 0)
      rc->max_gf_interval = vp9_rc_get_default_max_gf_interval(
          cpi->framerate, rc->min_gf_interval);

    // Extended interval for genuinely static scenes
    rc->static_scene_max_gf_interval = MAX_LAG_BUFFERS * 2;

    if (is_altref_enabled(cpi)) {
      if (rc->static_scene_max_gf_interval > oxcf->lag_in_frames - 1)
        rc->static_scene_max_gf_interval = oxcf->lag_in_frames - 1;
    }

    if (rc->max_gf_interval > rc->static_scene_max_gf_interval)
      rc->max_gf_interval = rc->static_scene_max_gf_interval;

    // Clamp min to max
    rc->min_gf_interval = VPXMIN(rc->min_gf_interval, rc->max_gf_interval);
  }
}

void vp9_rc_update_framerate(VP9_COMP *cpi) {
  const VP9_COMMON *const cm = &cpi->common;
  const VP9EncoderConfig *const oxcf = &cpi->oxcf;
  RATE_CONTROL *const rc = &cpi->rc;
  int vbr_max_bits;

  rc->avg_frame_bandwidth = (int)(oxcf->target_bandwidth / cpi->framerate);
  rc->min_frame_bandwidth =
      (int)(rc->avg_frame_bandwidth * oxcf->two_pass_vbrmin_section / 100);

  rc->min_frame_bandwidth =
      VPXMAX(rc->min_frame_bandwidth, FRAME_OVERHEAD_BITS);

  // A maximum bitrate for a frame is defined.
  // The baseline for this aligns with HW implementations that
  // can support decode of 1080P content up to a bitrate of MAX_MB_RATE bits
  // per 16x16 MB (averaged over a frame). However this limit is extended if
  // a very high rate is given on the command line or the the rate cannnot
  // be acheived because of a user specificed max q (e.g. when the user
  // specifies lossless encode.
  vbr_max_bits =
      (int)(((int64_t)rc->avg_frame_bandwidth * oxcf->two_pass_vbrmax_section) /
            100);
  rc->max_frame_bandwidth =
      VPXMAX(VPXMAX((cm->MBs * MAX_MB_RATE), MAXRATE_1080P), vbr_max_bits);

  vp9_rc_set_gf_interval_range(cpi, rc);
}

#define VBR_PCT_ADJUSTMENT_LIMIT 50
// For VBR...adjustment to the frame target based on error from previous frames
static void vbr_rate_correction(VP9_COMP *cpi, int *this_frame_target) {
  RATE_CONTROL *const rc = &cpi->rc;
  int64_t vbr_bits_off_target = rc->vbr_bits_off_target;
  int max_delta;
  int frame_window = VPXMIN(16, ((int)cpi->twopass.total_stats.count -
                                 cpi->common.current_video_frame));

  // Calcluate the adjustment to rate for this frame.
  if (frame_window > 0) {
    max_delta = (vbr_bits_off_target > 0)
                    ? (int)(vbr_bits_off_target / frame_window)
                    : (int)(-vbr_bits_off_target / frame_window);

    max_delta = VPXMIN(max_delta,
                       ((*this_frame_target * VBR_PCT_ADJUSTMENT_LIMIT) / 100));

    // vbr_bits_off_target > 0 means we have extra bits to spend
    if (vbr_bits_off_target > 0) {
      *this_frame_target += (vbr_bits_off_target > max_delta)
                                ? max_delta
                                : (int)vbr_bits_off_target;
    } else {
      *this_frame_target -= (vbr_bits_off_target < -max_delta)
                                ? max_delta
                                : (int)-vbr_bits_off_target;
    }
  }

  // Fast redistribution of bits arising from massive local undershoot.
  // Dont do it for kf,arf,gf or overlay frames.
  if (!frame_is_kf_gf_arf(cpi) && !rc->is_src_frame_alt_ref &&
      rc->vbr_bits_off_target_fast) {
    int one_frame_bits = VPXMAX(rc->avg_frame_bandwidth, *this_frame_target);
    int fast_extra_bits;
    fast_extra_bits = (int)VPXMIN(rc->vbr_bits_off_target_fast, one_frame_bits);
    fast_extra_bits = (int)VPXMIN(
        fast_extra_bits,
        VPXMAX(one_frame_bits / 8, rc->vbr_bits_off_target_fast / 8));
    *this_frame_target += (int)fast_extra_bits;
    rc->vbr_bits_off_target_fast -= fast_extra_bits;
  }
}

void vp9_set_target_rate(VP9_COMP *cpi) {
  RATE_CONTROL *const rc = &cpi->rc;
  int target_rate = rc->base_frame_target;

  if (cpi->common.frame_type == KEY_FRAME)
    target_rate = vp9_rc_clamp_iframe_target_size(cpi, target_rate);
  else
    target_rate = vp9_rc_clamp_pframe_target_size(cpi, target_rate);

  // Correction to rate target based on prior over or under shoot.
  if (cpi->oxcf.rc_mode == VPX_VBR || cpi->oxcf.rc_mode == VPX_CQ)
    vbr_rate_correction(cpi, &target_rate);
  vp9_rc_set_frame_target(cpi, target_rate);
}

// Check if we should resize, based on average QP from past x frames.
// Only allow for resize at most one scale down for now, scaling factor is 2.
int vp9_resize_one_pass_cbr(VP9_COMP *cpi) {
  const VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;
  RESIZE_ACTION resize_action = NO_RESIZE;
  int avg_qp_thr1 = 70;
  int avg_qp_thr2 = 50;
  int min_width = 180;
  int min_height = 180;
  int down_size_on = 1;
  cpi->resize_scale_num = 1;
  cpi->resize_scale_den = 1;
  // Don't resize on key frame; reset the counters on key frame.
  if (cm->frame_type == KEY_FRAME) {
    cpi->resize_avg_qp = 0;
    cpi->resize_count = 0;
    return 0;
  }
  // Check current frame reslution to avoid generating frames smaller than
  // the minimum resolution.
  if (ONEHALFONLY_RESIZE) {
    if ((cm->width >> 1) < min_width || (cm->height >> 1) < min_height)
      down_size_on = 0;
  } else {
    if (cpi->resize_state == ORIG &&
        (cm->width * 3 / 4 < min_width || cm->height * 3 / 4 < min_height))
      return 0;
    else if (cpi->resize_state == THREE_QUARTER &&
             ((cpi->oxcf.width >> 1) < min_width ||
              (cpi->oxcf.height >> 1) < min_height))
      down_size_on = 0;
  }

#if CONFIG_VP9_TEMPORAL_DENOISING
  // If denoiser is on, apply a smaller qp threshold.
  if (cpi->oxcf.noise_sensitivity > 0) {
    avg_qp_thr1 = 60;
    avg_qp_thr2 = 40;
  }
#endif

  // Resize based on average buffer underflow and QP over some window.
  // Ignore samples close to key frame, since QP is usually high after key.
  if (cpi->rc.frames_since_key > 2 * cpi->framerate) {
    const int window = (int)(4 * cpi->framerate);
    cpi->resize_avg_qp += cm->base_qindex;
    if (cpi->rc.buffer_level < (int)(30 * rc->optimal_buffer_level / 100))
      ++cpi->resize_buffer_underflow;
    ++cpi->resize_count;
    // Check for resize action every "window" frames.
    if (cpi->resize_count >= window) {
      int avg_qp = cpi->resize_avg_qp / cpi->resize_count;
      // Resize down if buffer level has underflowed sufficient amount in past
      // window, and we are at original or 3/4 of original resolution.
      // Resize back up if average QP is low, and we are currently in a resized
      // down state, i.e. 1/2 or 3/4 of original resolution.
      // Currently, use a flag to turn 3/4 resizing feature on/off.
      if (cpi->resize_buffer_underflow > (cpi->resize_count >> 2)) {
        if (cpi->resize_state == THREE_QUARTER && down_size_on) {
          resize_action = DOWN_ONEHALF;
          cpi->resize_state = ONE_HALF;
        } else if (cpi->resize_state == ORIG) {
          resize_action = ONEHALFONLY_RESIZE ? DOWN_ONEHALF : DOWN_THREEFOUR;
          cpi->resize_state = ONEHALFONLY_RESIZE ? ONE_HALF : THREE_QUARTER;
        }
      } else if (cpi->resize_state != ORIG &&
                 avg_qp < avg_qp_thr1 * cpi->rc.worst_quality / 100) {
        if (cpi->resize_state == THREE_QUARTER ||
            avg_qp < avg_qp_thr2 * cpi->rc.worst_quality / 100 ||
            ONEHALFONLY_RESIZE) {
          resize_action = UP_ORIG;
          cpi->resize_state = ORIG;
        } else if (cpi->resize_state == ONE_HALF) {
          resize_action = UP_THREEFOUR;
          cpi->resize_state = THREE_QUARTER;
        }
      }
      // Reset for next window measurement.
      cpi->resize_avg_qp = 0;
      cpi->resize_count = 0;
      cpi->resize_buffer_underflow = 0;
    }
  }
  // If decision is to resize, reset some quantities, and check is we should
  // reduce rate correction factor,
  if (resize_action != NO_RESIZE) {
    int target_bits_per_frame;
    int active_worst_quality;
    int qindex;
    int tot_scale_change;
    if (resize_action == DOWN_THREEFOUR || resize_action == UP_THREEFOUR) {
      cpi->resize_scale_num = 3;
      cpi->resize_scale_den = 4;
    } else if (resize_action == DOWN_ONEHALF) {
      cpi->resize_scale_num = 1;
      cpi->resize_scale_den = 2;
    } else {  // UP_ORIG or anything else
      cpi->resize_scale_num = 1;
      cpi->resize_scale_den = 1;
    }
    tot_scale_change = (cpi->resize_scale_den * cpi->resize_scale_den) /
                       (cpi->resize_scale_num * cpi->resize_scale_num);
    // Reset buffer level to optimal, update target size.
    rc->buffer_level = rc->optimal_buffer_level;
    rc->bits_off_target = rc->optimal_buffer_level;
    rc->this_frame_target = calc_pframe_target_size_one_pass_cbr(cpi);
    // Get the projected qindex, based on the scaled target frame size (scaled
    // so target_bits_per_mb in vp9_rc_regulate_q will be correct target).
    target_bits_per_frame = (resize_action >= 0)
                                ? rc->this_frame_target * tot_scale_change
                                : rc->this_frame_target / tot_scale_change;
    active_worst_quality = calc_active_worst_quality_one_pass_cbr(cpi);
    qindex = vp9_rc_regulate_q(cpi, target_bits_per_frame, rc->best_quality,
                               active_worst_quality);
    // If resize is down, check if projected q index is close to worst_quality,
    // and if so, reduce the rate correction factor (since likely can afford
    // lower q for resized frame).
    if (resize_action > 0 && qindex > 90 * cpi->rc.worst_quality / 100) {
      rc->rate_correction_factors[INTER_NORMAL] *= 0.85;
    }
    // If resize is back up, check if projected q index is too much above the
    // current base_qindex, and if so, reduce the rate correction factor
    // (since prefer to keep q for resized frame at least close to previous q).
    if (resize_action < 0 && qindex > 130 * cm->base_qindex / 100) {
      rc->rate_correction_factors[INTER_NORMAL] *= 0.9;
    }
  }
  return resize_action;
}

void adjust_gf_boost_lag_one_pass_vbr(VP9_COMP *cpi, uint64_t avg_sad_current) {
  VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;
  int target;
  int found = 0;
  int found2 = 0;
  int frame;
  int i;
  uint64_t avg_source_sad_lag = avg_sad_current;
  int high_source_sad_lagindex = -1;
  int steady_sad_lagindex = -1;
  uint32_t sad_thresh1 = 60000;
  uint32_t sad_thresh2 = 120000;
  int low_content = 0;
  int high_content = 0;
  double rate_err = 1.0;
  // Get measure of complexity over the future frames, and get the first
  // future frame with high_source_sad/scene-change.
  int tot_frames = (int)vp9_lookahead_depth(cpi->lookahead) - 1;
  for (frame = tot_frames; frame >= 1; --frame) {
    const int lagframe_idx = tot_frames - frame + 1;
    uint64_t reference_sad = rc->avg_source_sad[0];
    for (i = 1; i < lagframe_idx; ++i) {
      if (rc->avg_source_sad[i] > 0)
        reference_sad = (3 * reference_sad + rc->avg_source_sad[i]) >> 2;
    }
    // Detect up-coming scene change.
    if (!found &&
        (rc->avg_source_sad[lagframe_idx] >
             VPXMAX(sad_thresh1, (unsigned int)(reference_sad << 1)) ||
         rc->avg_source_sad[lagframe_idx] >
             VPXMAX(3 * sad_thresh1 >> 2,
                    (unsigned int)(reference_sad << 2)))) {
      high_source_sad_lagindex = lagframe_idx;
      found = 1;
    }
    // Detect change from motion to steady.
    if (!found2 && lagframe_idx > 1 && lagframe_idx < tot_frames &&
        rc->avg_source_sad[lagframe_idx - 1] > (sad_thresh1 >> 2)) {
      found2 = 1;
      for (i = lagframe_idx; i < tot_frames; ++i) {
        if (!(rc->avg_source_sad[i] > 0 &&
              rc->avg_source_sad[i] < (sad_thresh1 >> 2) &&
              rc->avg_source_sad[i] <
                  (rc->avg_source_sad[lagframe_idx - 1] >> 1))) {
          found2 = 0;
          i = tot_frames;
        }
      }
      if (found2) steady_sad_lagindex = lagframe_idx;
    }
    avg_source_sad_lag += rc->avg_source_sad[lagframe_idx];
  }
  if (tot_frames > 0) avg_source_sad_lag = avg_source_sad_lag / tot_frames;
  // Constrain distance between detected scene cuts.
  if (high_source_sad_lagindex != -1 &&
      high_source_sad_lagindex != rc->high_source_sad_lagindex - 1 &&
      abs(high_source_sad_lagindex - rc->high_source_sad_lagindex) < 4)
    rc->high_source_sad_lagindex = -1;
  else
    rc->high_source_sad_lagindex = high_source_sad_lagindex;
  // Adjust some factors for the next GF group, ignore initial key frame,
  // and only for lag_in_frames not too small.
  if (cpi->refresh_golden_frame == 1 && cm->frame_type != KEY_FRAME &&
      cm->current_video_frame > 30 && cpi->oxcf.lag_in_frames > 8) {
    int frame_constraint;
    if (rc->rolling_target_bits > 0)
      rate_err =
          (double)rc->rolling_actual_bits / (double)rc->rolling_target_bits;
    high_content = high_source_sad_lagindex != -1 ||
                   avg_source_sad_lag > (rc->prev_avg_source_sad_lag << 1) ||
                   avg_source_sad_lag > sad_thresh2;
    low_content = high_source_sad_lagindex == -1 &&
                  ((avg_source_sad_lag < (rc->prev_avg_source_sad_lag >> 1)) ||
                   (avg_source_sad_lag < sad_thresh1));
    if (low_content) {
      rc->gfu_boost = DEFAULT_GF_BOOST;
      rc->baseline_gf_interval =
          VPXMIN(15, (3 * rc->baseline_gf_interval) >> 1);
    } else if (high_content) {
      rc->gfu_boost = DEFAULT_GF_BOOST >> 1;
      rc->baseline_gf_interval = (rate_err > 3.0)
                                     ? VPXMAX(10, rc->baseline_gf_interval >> 1)
                                     : VPXMAX(6, rc->baseline_gf_interval >> 1);
    }
    // Check for constraining gf_interval for up-coming scene/content changes,
    // or for up-coming key frame, whichever is closer.
    frame_constraint = rc->frames_to_key;
    if (rc->high_source_sad_lagindex > 0 &&
        frame_constraint > rc->high_source_sad_lagindex)
      frame_constraint = rc->high_source_sad_lagindex;
    if (steady_sad_lagindex > 3 && frame_constraint > steady_sad_lagindex)
      frame_constraint = steady_sad_lagindex;
    adjust_gfint_frame_constraint(cpi, frame_constraint);
    rc->frames_till_gf_update_due = rc->baseline_gf_interval;
    // Adjust factors for active_worst setting & af_ratio for next gf interval.
    rc->fac_active_worst_inter = 150;  // corresponds to 3/2 (= 150 /100).
    rc->fac_active_worst_gf = 100;
    if (rate_err < 1.5 && !high_content) {
      rc->fac_active_worst_inter = 120;
      rc->fac_active_worst_gf = 90;
    }
    if (low_content && rc->avg_frame_low_motion > 80) {
      rc->af_ratio_onepass_vbr = 15;
    } else if (high_content || rc->avg_frame_low_motion < 30) {
      rc->af_ratio_onepass_vbr = 5;
      rc->gfu_boost = DEFAULT_GF_BOOST >> 2;
    }
    target = calc_pframe_target_size_one_pass_vbr(cpi);
    vp9_rc_set_frame_target(cpi, target);
  }
  rc->prev_avg_source_sad_lag = avg_source_sad_lag;
}

// Compute average source sad (temporal sad: between current source and
// previous source) over a subset of superblocks. Use this is detect big changes
// in content and allow rate control to react.
// This function also handles special case of lag_in_frames, to measure content
// level in #future frames set by the lag_in_frames.
void vp9_avg_source_sad(VP9_COMP *cpi) {
  VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;
  rc->high_source_sad = 0;
  if (cpi->Last_Source != NULL &&
      cpi->Last_Source->y_width == cpi->Source->y_width &&
      cpi->Last_Source->y_height == cpi->Source->y_height) {
    YV12_BUFFER_CONFIG *frames[MAX_LAG_BUFFERS] = { NULL };
    uint8_t *src_y = cpi->Source->y_buffer;
    int src_ystride = cpi->Source->y_stride;
    uint8_t *last_src_y = cpi->Last_Source->y_buffer;
    int last_src_ystride = cpi->Last_Source->y_stride;
    int start_frame = 0;
    int frames_to_buffer = 1;
    int frame = 0;
    uint64_t avg_sad_current = 0;
    uint32_t min_thresh = 4000;
    float thresh = 8.0f;
    if (cpi->oxcf.rc_mode == VPX_VBR) {
      min_thresh = 60000;
      thresh = 2.1f;
    }
    if (cpi->oxcf.lag_in_frames > 0) {
      frames_to_buffer = (cm->current_video_frame == 1)
                             ? (int)vp9_lookahead_depth(cpi->lookahead) - 1
                             : 2;
      start_frame = (int)vp9_lookahead_depth(cpi->lookahead) - 1;
      for (frame = 0; frame < frames_to_buffer; ++frame) {
        const int lagframe_idx = start_frame - frame;
        if (lagframe_idx >= 0) {
          struct lookahead_entry *buf =
              vp9_lookahead_peek(cpi->lookahead, lagframe_idx);
          frames[frame] = &buf->img;
        }
      }
      // The avg_sad for this current frame is the value of frame#1
      // (first future frame) from previous frame.
      avg_sad_current = rc->avg_source_sad[1];
      if (avg_sad_current >
              VPXMAX(min_thresh,
                     (unsigned int)(rc->avg_source_sad[0] * thresh)) &&
          cm->current_video_frame > (unsigned int)cpi->oxcf.lag_in_frames)
        rc->high_source_sad = 1;
      else
        rc->high_source_sad = 0;
      // Update recursive average for current frame.
      if (avg_sad_current > 0)
        rc->avg_source_sad[0] =
            (3 * rc->avg_source_sad[0] + avg_sad_current) >> 2;
      // Shift back data, starting at frame#1.
      for (frame = 1; frame < cpi->oxcf.lag_in_frames - 1; ++frame)
        rc->avg_source_sad[frame] = rc->avg_source_sad[frame + 1];
    }
    for (frame = 0; frame < frames_to_buffer; ++frame) {
      if (cpi->oxcf.lag_in_frames == 0 ||
          (frames[frame] != NULL && frames[frame + 1] != NULL &&
           frames[frame]->y_width == frames[frame + 1]->y_width &&
           frames[frame]->y_height == frames[frame + 1]->y_height)) {
        int sbi_row, sbi_col;
        const int lagframe_idx =
            (cpi->oxcf.lag_in_frames == 0) ? 0 : start_frame - frame + 1;
        const BLOCK_SIZE bsize = BLOCK_64X64;
        // Loop over sub-sample of frame, compute average sad over 64x64 blocks.
        uint64_t avg_sad = 0;
        int num_samples = 0;
        int sb_cols = (cm->mi_cols + MI_BLOCK_SIZE - 1) / MI_BLOCK_SIZE;
        int sb_rows = (cm->mi_rows + MI_BLOCK_SIZE - 1) / MI_BLOCK_SIZE;
        if (cpi->oxcf.lag_in_frames > 0) {
          src_y = frames[frame]->y_buffer;
          src_ystride = frames[frame]->y_stride;
          last_src_y = frames[frame + 1]->y_buffer;
          last_src_ystride = frames[frame + 1]->y_stride;
        }
        for (sbi_row = 0; sbi_row < sb_rows; ++sbi_row) {
          for (sbi_col = 0; sbi_col < sb_cols; ++sbi_col) {
            // Checker-board pattern, ignore boundary.
            if ((sbi_row > 0 && sbi_col > 0) &&
                (sbi_row < sb_rows - 1 && sbi_col < sb_cols - 1) &&
                ((sbi_row % 2 == 0 && sbi_col % 2 == 0) ||
                 (sbi_row % 2 != 0 && sbi_col % 2 != 0))) {
              num_samples++;
              avg_sad += cpi->fn_ptr[bsize].sdf(src_y, src_ystride, last_src_y,
                                                last_src_ystride);
            }
            src_y += 64;
            last_src_y += 64;
          }
          src_y += (src_ystride << 6) - (sb_cols << 6);
          last_src_y += (last_src_ystride << 6) - (sb_cols << 6);
        }
        if (num_samples > 0) avg_sad = avg_sad / num_samples;
        // Set high_source_sad flag if we detect very high increase in avg_sad
        // between current and previous frame value(s). Use minimum threshold
        // for cases where there is small change from content that is completely
        // static.
        if (lagframe_idx == 0) {
          if (avg_sad >
                  VPXMAX(min_thresh,
                         (unsigned int)(rc->avg_source_sad[0] * thresh)) &&
              rc->frames_since_key > 1)
            rc->high_source_sad = 1;
          else
            rc->high_source_sad = 0;
          if (avg_sad > 0 || cpi->oxcf.rc_mode == VPX_CBR)
            rc->avg_source_sad[0] = (3 * rc->avg_source_sad[0] + avg_sad) >> 2;
        } else {
          rc->avg_source_sad[lagframe_idx] = avg_sad;
        }
      }
    }
    // For VBR, under scene change/high content change, force golden refresh.
    if (cpi->oxcf.rc_mode == VPX_VBR && cm->frame_type != KEY_FRAME &&
        rc->high_source_sad && rc->frames_to_key > 3 &&
        rc->count_last_scene_change > 4 &&
        cpi->ext_refresh_frame_flags_pending == 0) {
      int target;
      cpi->refresh_golden_frame = 1;
      rc->gfu_boost = DEFAULT_GF_BOOST >> 1;
      rc->baseline_gf_interval =
          VPXMIN(20, VPXMAX(10, rc->baseline_gf_interval));
      adjust_gfint_frame_constraint(cpi, rc->frames_to_key);
      rc->frames_till_gf_update_due = rc->baseline_gf_interval;
      target = calc_pframe_target_size_one_pass_vbr(cpi);
      vp9_rc_set_frame_target(cpi, target);
      rc->count_last_scene_change = 0;
    } else {
      rc->count_last_scene_change++;
    }
    // If lag_in_frame is used, set the gf boost and interval.
    if (cpi->oxcf.lag_in_frames > 0)
      adjust_gf_boost_lag_one_pass_vbr(cpi, avg_sad_current);
  }
}

// Test if encoded frame will significantly overshoot the target bitrate, and
// if so, set the QP, reset/adjust some rate control parameters, and return 1.
int vp9_encodedframe_overshoot(VP9_COMP *cpi, int frame_size, int *q) {
  VP9_COMMON *const cm = &cpi->common;
  RATE_CONTROL *const rc = &cpi->rc;
  int thresh_qp = 3 * (rc->worst_quality >> 2);
  int thresh_rate = rc->avg_frame_bandwidth * 10;
  if (cm->base_qindex < thresh_qp && frame_size > thresh_rate) {
    double rate_correction_factor =
        cpi->rc.rate_correction_factors[INTER_NORMAL];
    const int target_size = cpi->rc.avg_frame_bandwidth;
    double new_correction_factor;
    int target_bits_per_mb;
    double q2;
    int enumerator;
    // Force a re-encode, and for now use max-QP.
    *q = cpi->rc.worst_quality;
    // Adjust avg_frame_qindex, buffer_level, and rate correction factors, as
    // these parameters will affect QP selection for subsequent frames. If they
    // have settled down to a very different (low QP) state, then not adjusting
    // them may cause next frame to select low QP and overshoot again.
    cpi->rc.avg_frame_qindex[INTER_FRAME] = *q;
    rc->buffer_level = rc->optimal_buffer_level;
    rc->bits_off_target = rc->optimal_buffer_level;
    // Reset rate under/over-shoot flags.
    cpi->rc.rc_1_frame = 0;
    cpi->rc.rc_2_frame = 0;
    // Adjust rate correction factor.
    target_bits_per_mb =
        (int)(((uint64_t)target_size << BPER_MB_NORMBITS) / cm->MBs);
    // Rate correction factor based on target_bits_per_mb and qp (==max_QP).
    // This comes from the inverse computation of vp9_rc_bits_per_mb().
    q2 = vp9_convert_qindex_to_q(*q, cm->bit_depth);
    enumerator = 1800000;  // Factor for inter frame.
    enumerator += (int)(enumerator * q2) >> 12;
    new_correction_factor = (double)target_bits_per_mb * q2 / enumerator;
    if (new_correction_factor > rate_correction_factor) {
      rate_correction_factor =
          VPXMIN(2.0 * rate_correction_factor, new_correction_factor);
      if (rate_correction_factor > MAX_BPB_FACTOR)
        rate_correction_factor = MAX_BPB_FACTOR;
      cpi->rc.rate_correction_factors[INTER_NORMAL] = rate_correction_factor;
    }
    // For temporal layers, reset the rate control parametes across all
    // temporal layers.
    if (cpi->use_svc) {
      int i = 0;
      SVC *svc = &cpi->svc;
      for (i = 0; i < svc->number_temporal_layers; ++i) {
        const int layer = LAYER_IDS_TO_IDX(svc->spatial_layer_id, i,
                                           svc->number_temporal_layers);
        LAYER_CONTEXT *lc = &svc->layer_context[layer];
        RATE_CONTROL *lrc = &lc->rc;
        lrc->avg_frame_qindex[INTER_FRAME] = *q;
        lrc->buffer_level = rc->optimal_buffer_level;
        lrc->bits_off_target = rc->optimal_buffer_level;
        lrc->rc_1_frame = 0;
        lrc->rc_2_frame = 0;
        lrc->rate_correction_factors[INTER_NORMAL] = rate_correction_factor;
      }
    }
    return 1;
  } else {
    return 0;
  }
}