| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778 |
- CountryCode: 1
- AreaCode: 800
- FAXNumber: +1.800.555.1212
- LongDistancePrefix: 1
- InternationalPrefix: 011
- DialStringRules: etc/dialrules
- ServerTracing: 0xFFF
- SessionTracing: 0xFFF
- RecvFileMode: 0600
- LogFileMode: 0600
- DeviceMode: 0600
- RingsBeforeAnswer: 1
- SpeakerVolume: off
- GettyArgs: "-h %l dx_%s"
- LocalIdentifier: "FS"
- TagLineFont: etc/lutRS18.pcf
- TagLineFormat: "From %%l|%c|Page %%P of %%T"
- MaxRecvPages: 200
- #
- #
- # Modem-related stuff: should reflect modem command interface
- # and hardware connection/cabling (e.g. flow control).
- #
- ModemType: Class1 # use this to supply a hint
- #
- # Enabling this will use the hfaxd-protocol to set Caller*ID
- #
- #ModemSetOriginCmd: AT+VSID="%s","%d"
- #
- # If "glare" during initialization becomes a problem then take
- # the modem off-hook during initialization, and then place it
- # back on-hook when done.
- #
- #ModemResetCmds: "ATH1\nAT+VCID=1" # enables CallID display
- #ModemReadyCmds: ATH0
- Class1AdaptRecvCmd: AT+FAR=1
- Class1TMConnectDelay: 400 # counteract quick CONNECT response
- #
- # If you have trouble with V.17 receiving or sending,
- # you may want to enable one of these, respectively.
- #
- #Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17 receiving
- #Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17 sending
- #
- # You'll likely want Caller*ID display (also displays DID) enabled.
- #
- ModemResetCmds: AT+VCID=1 # enables CallID display
- #
- # The pty does not support changing parity.
- #
- PagerTTYParity: none
- #
- # If you are "missing" Caller*ID data on some calls (but not all)
- # and if you do not have adequate glare protection you may want to
- # not answer based on RINGs, but rather enable the CallIDAnswerLength
- # for NDID, disable AT+VCID=1 and do this:
- #
- #RingsBeforeAnswer: 0
- #ModemRingResponse: AT+VRID=1
- # Uncomment DATE and TIME if you really want them, but you probably don't.
- #CallIDPattern: "DATE="
- #CallIDPattern: "TIME="
- CallIDPattern: "NMBR="
- CallIDPattern: "NAME="
- CallIDPattern: "ANID="
- #CallIDPattern: "USER=" # username provided by call
- #CallIDPattern: "PASS=" # password provided by call
- #CallIDPattern: "CDID=" # DID context in call
- CallIDPattern: "NDID="
- #CallIDAnswerLength: 4
|
